vinnY
25-05-2010, 05:54 PM
looking for some ideas on how to mount an aftermarket door lock actuator inside the door of an ek(any ideas are welcome though)
the problem with ek's are that the most convenient spot to mount the damn thing happens to bend and it appears my installer from 4 years ago decided it'd be a good idea to mount the actuator to run diagonally with the bend so sure it locks fine when you hit the remote but manual locking via the internal latch is rather difficult or impossible
thought of an idea that i'd try tonight to see if it works, would like to see what other people have done about it too though
the problem with ek's are that the most convenient spot to mount the damn thing happens to bend and it appears my installer from 4 years ago decided it'd be a good idea to mount the actuator to run diagonally with the bend so sure it locks fine when you hit the remote but manual locking via the internal latch is rather difficult or impossible
thought of an idea that i'd try tonight to see if it works, would like to see what other people have done about it too though