View Full Version : 17x8.5 +30 for Dc2R?
Samm928
07-06-2010, 10:59 AM
is it too much?
what would be a good/perfect fitment for dc2r?
size and offset.
thanks!!
If you have a k20a then no.
depends on how much guard clearance you want and how many degree camber you want to run front and rear.
anfo2gig
08-06-2010, 08:23 PM
Think 17 would be too much IMO.
Try 16?
DC2-PWR
08-06-2010, 08:26 PM
17's are abit too big for dc2's when they are lowerd
Stay with 16's, race spec size for dc2's :D.
is it too much?
what would be a good/perfect fitment for dc2r?
size and offset.
thanks!!
no chance,
If you wanna run for looks, you would want little camber so 17x8 with a +30 would already be out of the guards. I've fitted a 18x9 with a +40 offset for lols, That sat outside by an inch.
As nice as it would look, its not suited for the dc2r at all :( Unless its something like Enkei RPF01 :]
Samm928
09-06-2010, 12:49 AM
thanks guys.. trying to find some decent flush race rims. gonna get my car measured up ;)
VTECMACHINE
09-06-2010, 09:55 PM
Seriously, if it's just for looks and you want herra frush, just get Rota's hahaah.
Samm928
10-06-2010, 01:15 AM
i wanna be like you.. my idooooooll.. *blushes*
tiah313
10-06-2010, 01:18 AM
16inch rota slipstream
http://blog.kw-suspension.com/wp-content/uploads/2010/01/June-DC2.pdf
vuongkong
11-11-2010, 06:51 PM
i fink 17 are okay man. get some og rims and will look cool i ran 17s at one stage imo it filled the guards out better. lol
but you have a k too. think the slump is low. so it should help.
r3ckless
12-11-2010, 09:12 AM
I used to have advan rg in 17x8.5+30.. I got them from spl k. He had a k swapped dc2.. I dunno how much camber he was running, but he said he scrubbed alot. I believe 17 are way too big for dc2.. 16" ftw.. Pretty sure 16" should clear your sump:)
[zeth]
13-11-2010, 04:59 PM
17s are ok... more choices for tyres although depending on the design of the rims.
16s any styles of rims will look good but lesser choice of tyres.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.