PDA

View Full Version : need help!


cyryl07
14-06-2010, 06:11 PM
are all d series single cam have the same drive shaft (CV)?
grifty
14-06-2010, 10:50 PM
are all d series single cam have the same drive shaft (CV)?

nope. If you could post up which driveshafts you want to use on which car then we might be able to tell you if they will work.


single cam.

huh???
JohnO
14-06-2010, 10:51 PM
misread it my bad
cyryl07
15-06-2010, 12:00 AM
i have a ED with a d16y engine. i picked up a drive shaft from honbits but i told them for a 92 civic, considering i have the d16y. it keeps leaking from where the driveshaft meets the gearbox. ive tried changing the seal for it and still leaks could this be a drive shaft issue or ...?
vinnY
15-06-2010, 12:39 AM
sure you've got the right seal and installed it correctly?
i've had some troubles before with the seals
part number off by one character meant the ID was 40mm instead of 35mm which lead to the gearbox running dry and once installing the seal too far deep instead of lining it up with the gearbox casing
cyryl07
15-06-2010, 06:09 PM
oh really? so they are all different sizes? il have look at it ay. that might actually be the problem. thanks !
vinnY
15-06-2010, 06:12 PM
not all but they can be, double check your part number against a known good one
cyryl07
15-06-2010, 11:06 PM
yeh i might check the part number. coz the engine bay is pretty much mix and match.
grifty
15-06-2010, 11:57 PM
the inner cv doesnt have any free play when you plug it into the transmission does it?