PDA

View Full Version : Shedding some light?



JohnnyJohnJohn
13-07-2010, 09:51 PM
Hey guys,

just need some light shed on my problems with my recently bought civic i got a while ago, still under progress but ive had problems with it,
1. Im sure after reading up on this (http://techauto.tripod.com/) article that its def the main fuel relay as it shows all the symtoms mentioned, ive been hunting around for a replacement cause im not confident on doing the DIY solder trick on it since ive never soldered nor touched a soldering iron before, i went to honda and was quoted ~$130 for a new replacement :thumbdwn:, i went to fleabay and found quite afew but my problem is, are they any reliable or can they be trusted? heres (http://cgi.ebay.com/ebaymotors/92-95-Honda-Civic-DX-LX-EX-SI-Main-Fuel-Pump-Relay-_W0QQcmdZViewItemQQhashZitem4aa27a3d60QQitemZ32055 3500000QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries#ht_759wt_1165)the seller ive had my eyes on since its quite a big price diff. Are there any other places that i can go to? or better ways to acquire one?

2. Also im after a new set of spark plug leads, ive seen a few on fleabay after reading up on the forums from a seller but i dnt know which will fit since i cant find a specific set, my question is what other D series or maybe even B perhaps? that would allow me to use it on my engine? to make it easier here are my specs:
1992 Honda Civic Si EH9, D16A8, which is a DOHC Non-Vtec engine.

3. Would replacing the disty cap and rotor which shows signs of white residue of some sort and worn out contacts be recommended?

Lastly, i promise :p im going to be replacing my brake discs front and rear soon, what are the specs i need when acquiring new ones? more than likely after stockies, cnt really afford nor need slotted/drilled ones :(

Sorry, a honda noob in progress :cool:, but yea any input is greatly appreciated :thumbsup: Thanks.