PDA

View Full Version : De-badgring



Penga89
17-07-2010, 06:04 AM
I want to de-badge my car removing the accord and exi badges how do i go about doing this?

thanks!!

xenonkuraz
17-07-2010, 08:46 AM
Pm sent

niiCk
17-07-2010, 08:48 AM
its quite simple..
all you need to do is grab a hair dryer or heat gun..heat up the badges then get a piece of fishing line and slice it down behind the badge or you could use a credit card and slide it behind the back of the badges..
then you can use different types of stuff to remove the residue..your choice..

Lukey
17-07-2010, 09:02 AM
would a hair dryer work to heat them up?

ekcoupe
17-07-2010, 10:32 AM
^It did for me, after its off use a wax an grease remover to get rid of the excess glue

curtis265
17-07-2010, 06:40 PM
hair dryer/heat gun/hot day parkedin the sun will all work

niiCk
17-07-2010, 06:55 PM
yeah i said a hair dryer or heat gun would work..

Red_EG4
17-07-2010, 07:59 PM
What about H badges on an EG?

markismaximus
17-07-2010, 08:28 PM
What about H badges on an EG?

if you remove the H badges you will have 2 holes left in your boot and bonnet. there are pins on the badge which lineup with the holes on the panel

niiCk
17-07-2010, 08:43 PM
yeah if you take off the H badges on an EG, there will be two holes..
just leave them on unless youre doing a respray..

Red_EG4
17-07-2010, 09:00 PM
so you've just gotta give them a good pull?

niiCk
17-07-2010, 09:11 PM
yeah, im pretty sure theres some double sided tape around it to..so yeah heat it up and pull..

Red_EG4
17-07-2010, 09:19 PM
thanks fellas