EG with jdm intergra Si B18C cross over

[lsvtec]

hey guys,

i got a EG with a jdm Integra si B18C in it and i cant really notice the crossover.

I got a mugen style air box(stock intake pipe) and mugen headers.

What other bolt ons do i need to really hear the cross over???

[dougie_504]

Smoothe crossover is indicative of a smoothe torque curve. It's good because it means your power grows nice and smooth with the revs instead of jumping up quickly at VTEC. So you have a good mod setup!

Loud crossover sounds cool but isn't as practical.


EDIT: To answer your question, sell your good parts and get cheap sh!t like a $50 SRI and some random mild-steel press-bent exhaust with a $50 Super Cheap Auto muffler and some ebay headers. Then you might hear your crossover better :) lol

[EKVTIR-T]

Yup as above

Use this
http://vengenceparts.com/images/121_b.jpg

and one of these mufflers lol

http://redsports.sg/wp-content/uploads/2009/03/milo_tin_trophy.jpg

[MM89]

its just the nature of this motor. it's essentially the same motor as B18c2 - except for higher compression pistons

i have i/h/e on the same motor and it is quite noticeable. you're just gonna have to accept that with i/h/e bolt ons, it won't produce that B16A/B raw crossover.

try a j's racing whale penis intake. i witnessed this on my friend's jdm b16a. it went from big crossover to even bigger crossover.

[GSi_PSi]

if you want louder crossover, change your intake manifold to singlestage ie skunk2 and get typeR cams

[mocchi]

so the reason you did engine conversion is because you wanna hear vtak kick in?
man.

[[[d a n n y]]]

just an induction mod will do

[lsvtec]

i already got toda cams and cam gears, but yeah very smooth power curve

[egb16b]

your cams n cam gears would be the cause of the missing vtec crossover.

yes the vtec cross over is fun n all but i would much prefer a more linear torque curve.

[TheSaint]

a simota big tube intake from ebay will do the trick ... but those are some quality cams so its still gona be a smooth transition

[GSi_PSi]

what ecu are you running ? what intake manifold ? which toda cams?

[lsvtec]

stock ecu but im pretty sure its been re-mapped, stock intake manifold and i dont know what toda cams since i bought the motor with all the work already done from japan.

[MikeyG]

change your intake manifold and tb