View Full Version : Honda Crx EF7 Part interchangeability?
hey guys,
I brought myself a EF7 project bus and i am after a few parts. (bonnet, guards, front bumper)
i am wondering if any other model CRX parts are interchangeable? i trial fitted a bonnet yesterday and it seemed to be the right length but it sat to high at the sides?
any help would be great
also chasing parts as per sig!
cheers
Jordan :honda:
Spoon-Accord
28-07-2010, 12:23 AM
parts only interchangable would be the pre-facelifted crx's 88-89 models.
australian spec crx's will also fit on your current car
SiR front end would fit too, but you would need front bar, front bar re inforcement,headlights,bonnet and hood latch to fit it ( which is a ball breaker and costly)
so go to the wreckers or something, and find a australian delivered ED9 and everything from them will and should fit :)
if you have any other question's feel free to PM me, i have the exact same car (glassroof EF7 in black =] )
thanks mate that is perfect. exactly wat i wanted to know. also does any ED6 stuff fit on? the bonnet i tried is a aftermarket carbon one that came off a ed civic hatchback?
~Sp33~
28-07-2010, 10:30 AM
88-91 ED Hatch and 88-89 JDM CRX hoods are interchangeable.
so it should fit then... maybe the bonnet hinges are bent from the accident. the bonnet was the right size etc but it was sitting up with about an inch gap on the left hand side.
for anyone interested here is my little project
http://i215.photobucket.com/albums/cc62/Jord_civic/IMG_0138.jpg
http://i215.photobucket.com/albums/cc62/Jord_civic/IMG_0137.jpg
http://i215.photobucket.com/albums/cc62/Jord_civic/IMG_0136.jpg
http://i215.photobucket.com/albums/cc62/Jord_civic/IMG_0134.jpg
http://i215.photobucket.com/albums/cc62/Jord_civic/IMG_0133.jpg
Needs bit of work :)
dougie_504
30-07-2010, 11:00 AM
Glad to see you're taking up the job then mate :) Love CRX's and even more I love seeing them revived...
would a ED6 sedan front bar fit on the EF7?
dougie_504
09-08-2010, 11:11 PM
I have a feeling it doesn't
The people to ask would be jdm_b16 and ~Sp33~
~Sp33~
09-08-2010, 11:52 PM
There's no such thing as an ed6 sedan, but the ED/EF sedan front bumper is different to the CRX and not interchangeable.
its a ed sedan... so would the bonnet fit? and possibly the windscreen? its a complete car and only needs cvs done to be registerable. guy only wants $150 for it!
~Sp33~
10-08-2010, 10:27 AM
its a ed sedan...
All Aus spec ED sedans were ED3's.
so would the bonnet fit? and possibly the windscreen? its a complete car and only needs cvs done to be registerable. guy only wants $150 for it!
Nope, bonnet and windshield are not interchangeable.
ghey.... back to the drawing board.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.