wheel fitment dc2 vti-r

[mpk_3]

hey guys, im thinking of running 16x8 enkei rpf01s on my 94 dc2 vti-r
with +38 offset. how will it fit?
im after this sort of look, maybe a bit less aggresive. thanks!
http://farm5.static.flickr.com/4025/4613717275_a077425c6a_b.jpg

[tamay_s2k]

thats looks pretty good
i like
try this site out man
http://www.rimtuck.com
u should be able to find sum integras with crazy offset wheels
it also shows there specs, if they rolled there guards n all
mite give u a rough idea on wat will fit and wat wont.

[mpk_3]

awesome thanks man! +1

[Toilet]

It should sit close to flush, depending on how low you go..

[mpk_3]

will it affect the trackability of the car? i guess that depends on the suspension settings

[tamay_s2k]

yea
if ur running extreme offset
u will have clearance issues
wen i got my wheels for my s2k
bcuz my bak was 2 low
it was scrubbing on the guard..even wen i was driving straight
so i had 2 get my rear guards rolled, pulled and also had 2 get the rear pumper mount shaved and relocated
camber also plays a big roll
if u want the beefy aggressive offset..it comes with a lot of work..but do ur research
it all pays off in the end. :)

[mpk_3]

anyone running a similar setup on their DC2?

[tct]

im running 16x8 +32 enkei racing S on my dc2 vtir. its not dumped still got a finger gap.

it sits out of the guard a bit. it not noticable i will try take pics tonight after i finish work for u

[Tai]

It will fit.

Jsut depends how low you go and if it doesnt clear you can use Camber kits or get thinner profil tyres to help.

Many ways to get around it but the wheels you are enquiring about isnt hard to fit on a dc2.

[mpk_3]

@tct - thanks will check tonight :thumbsup:
@Tai - thanks for that. i might get 40 or 45 profile tyres for it to fit.

[tct]

hey
not great photos but heres the fitment
http://i26.tinypic.com/308kzgg.jpg
http://i25.tinypic.com/jpvv5g.jpg

[mpk_3]

@tct - cheers mate. any scrubbing issues?

[tct]

i drive mine everyday i havent heard any scrubbing at all =]

[Tai]

Its not gonan scrub at that height.

Thats still considered 4wd height lol jk

[Toilet]

Its not gonan scrub at that height.

Thats still considered 4wd height lol jk

Nah no joke, at that height. The possibility of running beefier wheels is possible. Hahaa

[Tai]

Of course it will clear at that height but it doesnt look as nice lol

If you can fit more than a finger in tehre it aint low enough haha.

[tct]

yea i would go lower but my dump pipes would scrape everywhere.
back in the day when it was still N/A
http://i30.tinypic.com/ru4mcx.jpg

sorri about spamming lol

[Toilet]

^ Heyyyy, that lips cheating :P
Anyways, this is a pic of when I had 15x8 +25. Just to give you some insight..
0 Finger Gap, with -2 degrees camber at the front. Tyres were 195/50's
It's a 15inch rim but with 16inch and 205/40-45, the circumference of the wheel should be approximately the same.

http://i703.photobucket.com/albums/ww31/PeanusEric/IMG_9144.jpg

[tct]

i know hahaha
that nice fitment and dish to =]

[mpk_3]

that's exactly the fitment i'm hoping to achieve with an rpf1