n e o n s .... [Archive] - Ozhonda Forums

Sp00n

31-12-2004, 07:27 AM

i'm trying to install neons under the front parcel (in the footwells) without putting any holes in my car. i've tried using double sided tape but due to sydney's usually fine weather, it melts off and falls back on the ground. does anyone have any siggestions? (man that was so aussie)

vtc

31-12-2004, 08:41 AM

Zip-ties, they can hold anything together. But if screw it to sumtin underneath there no one will ever see anything ever.

ACTI0NMAN-1

31-12-2004, 10:13 AM

i used gardening wire looped around the neon and the points i want to secure at.

TypeG

31-12-2004, 10:21 AM

lol
or get the neons which offer by Honda in Japan

simpdogg

01-01-2005, 01:21 PM

i zipped tied mine around each end of the neon

supatt

07-01-2005, 04:33 PM

Sp3rMz

07-01-2005, 05:22 PM

I used duct tape for mine :) works wonders LOL. So easy to uninstall too.

Sp3rMz

07-01-2005, 05:24 PM

i need to know how to hard wire the neons!...i tried to hard wire to the accessory wires but that just blows the fuse...even after i bought a higher power fuse!....
has anyone hard wired their neons?...please help!
I don't understand the hard wire part sorry. But doesnt ur neon cum with a power converter which should prevent fuse to blow?

ACTI0NMAN-1

07-01-2005, 05:43 PM

just wire them via the cigarette lighter.

bigdongers

07-01-2005, 05:56 PM

I don't understand the hard wire part sorry. But doesnt ur neon cum with a power converter which should prevent fuse to blow?
Some neons have this power converter bit stuck on the actual cigarette lighter part. therefore you cant cut this off.

DavidLing

07-01-2005, 09:42 PM

what is duct tape and Zip-ties??

MRFIT

07-01-2005, 10:27 PM

Duct Tape is what u use to shut people up....... hehehe.......

seen alot in movies.....

dark138

07-01-2005, 11:44 PM

i've done hardwiring on my car, with a switch too! Getting power directly from the battery using a 10amp fuse, nothing blows

7 x 12"
2 x 6" bubbles

i will take some pics and post it up on the weekend

i use valcro hook+loop tape. use alchol to wipe the surfaces first before sticking it on.

DavidLing

08-01-2005, 12:16 AM

i use valcro hook+loop tape. use alchol to wipe the surfaces first before sticking it on.Are u using the valcro hook+loop tape to stick the neon under the front panel (the plastic area) or on the carpet area?

if on the carpet area, i think i posted a thread b4 (http://www.ozhonda.com/forum/showthread.php?t=11706&highlight=neon), that i am using valcro hook+loop tape as well (I bought it from K-marks), but only using the hook side to stick on the carpet!

civiceg9

08-01-2005, 12:48 AM

get those 3M hooks and clips from Bunning, u can hook up almost anything

DavidLing

08-01-2005, 01:50 AM

get those 3M hooks and clips from Bunning, u can hook up almost anythingi did try to use the 3M double side sticker (espically for the 3M hook one) b4, it doesn't work well on the plastic place of my car either!

dark138

09-01-2005, 12:00 PM

double sided tape are a pain to get off. they leave marks on the surface you pull them off from.
valco can be taken off easier without leaving any marks on the surface, if it doesn't stick properly, use some alchol/carubrettor cleaner to wipe the surface, use a lighter to melt the glue on the valcro a little and it will stick for ages.