PDA

View Full Version : D series & B series oil sump bolts (holds the sump to the bottom block) the same?


im.Kusuma
07-08-2010, 10:16 PM
as title says,

I was wondering if the bolts are the same? o_O
the bolts that holds the oil sump to the bottom block.. or does it need to be specifically for b series?
thanks :thumbsup:
markismaximus
08-08-2010, 10:12 AM
they would be the same, as are most of the bolts on all Hondas.

The D-series uses a combination of M6-10mm socket head bolts and nuts. The only difference could be the length, so thats something I would check if you had the 2 to compare
bennjamin
08-08-2010, 11:24 AM
remember there is a few nuts on the sump too.
BTW B series same as D series
markismaximus
08-08-2010, 11:50 AM
they would be the same, as are most of the bolts on all Hondas.

The D-series uses a combination of M6-10mm socket head bolts and nuts. The only difference could be the length, so thats something I would check if you had the 2 to compare

Included the nuts as above