PDA

View Full Version : dc2 coilovers for da9?



teggy90
12-08-2010, 05:46 PM
hey guys. im wondering wether coilovers for a dc2 will fit on a 1990 da9?
cheers

Rayle
12-08-2010, 07:56 PM
You'll need DC2 front forks, but other than that they should bolt up fine. I know you said coilovers, but keep in mind that stock DA9 shocks are about 6cm longer than stock DC2 shocks.

teggy90
16-08-2010, 06:34 PM
ok thanks for that. big help. cheers

espionage85
16-08-2010, 06:49 PM
correct me if im wrong,
but i think you need dc2 rear lcas and front forks can be oem da9

Jon_51
17-08-2010, 11:15 AM
you don't need dc2 rear lcas ...
if you use dc2r suspension you need dc2r (itr or eg6) lcas

espionage85
17-08-2010, 11:27 AM
ahhh, ok..
thanks for correcting

sPoOnD_
29-10-2010, 08:22 PM
Will eg springs fit onto da9 shocks? Or can I use eg shocks on the da9?

Super-DA9
29-10-2010, 10:05 PM
EG Springs should fit fine, from memory they are also a tiny bit lower than DA9 ones. The rear shocks on EG as stated above are different as they are an eyelet type just like the DC2R. So you'd need DC2R rear LCA's.

A-man
31-10-2010, 02:33 PM
i might b confusedhere by u need the front lcas, for the shock? because its different lengths is that right?

so the rear as long as you have a dc2 (not type r) with the fork shock you wont need dc2 lcas, then you can use stock da9 for the rear