GE Wheel Offset

[TypeG]

Looking for buy a set of wheel for my GE but I was told GE need offset with 45+ to prevent rubbing. Is that true? Anyone with 16X7 +40? What tyre size do you use? Have you lower your car?
Please share

[dyljoy]

depend on how low u go for ur Jazz. From my experience over +48 should be safe, but it is not a big issue if you exchange ur camber bolt at front as i did on my +43, no any rubbing issue at all unless u get very low

PS: i drop 6cm at front and 8cm at rear

[TypeG]

so you reckon that camber bolt will do the track even i go for 40?
what can I get those camber bolt?
I am not plan to lower it much... max ard 1.5 inch

[takzi]

Hi guys,

I have equipped a set of Bilstein B14 on my GE...will a 16x7J 36+ fit with that?
Thank you for your comments.

[TypeG]

I dun think so.... a 40 will rub if the car go too low.....

[takzi]

I dun think so.... a 40 will rub if the car go too low.....

Thank you Type G,

Any recommendation for shops of website where i can take a look at some rims selections?

I also lived in Melbourne. Thanks

[TypeG]

US Ebay