b16a or ej8 wiring loom

[na-118]

to wire up a b16a into an ek do you require ek4 loom?
if there any other way of doing it?

[jdm_b16a]

to wire up a b16a into an ek do you require ek4 loom?
if there any other way of doing it?

You need all the basic wiring which most EFI cars have, plus the handful of wires that support VTEC.

Grab yourself an FSM for your car and check out the wiring at the ECU, then match that to the readily-available VTEC wiring diagrams.
Peter

[na-118]

the motor i got now has got rewired to microtech ecu thats why

[VTECnique]

i know edge auto sell an EK1 conversion harness, you may still need that harness even though ur running microtech....

[na-118]

bump.,,,,

[na-118]

is the autoej8 engine loom a big difference to the manual one?

[sangyz]

depends is it a b16a or b16a2?

[na-118]

auto ej8 auto and manual engine looms, is there a huge difference?

[fatboyz39]

There'll be additional plugs that arnt required plus some wiring to be done to make it work in a Ek4.