CU2 Piaa wiper blades.

[aussiebuddha]

guys, does anyone know if there are silicone blades from pia for our Cu2s?
I checked their website and they seem to have for the tsx 09. but i'm not sure it's exactly the same as ours.

[DR1V3R]

u can just take measurements of your wiper blades and order the same again from piaa, make u also measure the width. i have a set on my CL9 and they work great

[aussiebuddha]

How do you measure the width?
i mean, aren't they all 2mm or so?

[DR1V3R]

its either skinny or wide 5mm or 10mm i think. Just take your old ones in and match em up to the ones u need

*DLO01 Edit* removed name calling

[aussiebuddha]

The PIAA ones are quite expensive, the best I could get for the both wiper blade assembly was US$70, since you can't use just the "rubber" bits on the stock one. Far too expensive for just a wiper blade.

[Type R Positive]

The PIAA ones are quite expensive, the best I could get for the both wiper blade assembly was US$70, since you can't use just the "rubber" bits on the stock one. Far too expensive for just a wiper blade.
I ended buying 2 silicone blades to cut to size from ebay that should fit in the stock assembly.
Which ones did you get, and in what size?
It's coming up to monsoon season up here.....

[aussiebuddha]

I ended up buying 2Xwhole wiper blades from supercheap auto.
they're rubber, and i'll be looking to upgrade them to silicone in the future.

All the silicones I looked for don't work in the stock blades.

[corn_flakes]

^ what's the width on those?

[aussiebuddha]

Not sure. I'm taking a risk there, since I dont remember ever seeing different widths.
I emailed the seller anyways, so will let you know.
do you know the width of the stockers?

[corn_flakes]

stocks are 6mm. i've been told the 8mm ones don't fit

[aussiebuddha]

is that for cu2 or CL9? just wondering cos it says you have a cl9.

[corn_flakes]

sorry, that's for the CL9. i'm pretty certain the CU2's are 6mm too.