PDA

View Full Version : Brisbane Panel Beaters



Kwangstuhhh
08-09-2010, 10:23 PM
Hey fellow Brisbaners!

So my Euro's been hit (at a carpark without any cameras etc) in the rear for the 3rd time (and most severely) today and I've decided to take it in to a panel beater to get it fixed. Austral Honda has recommended a guy called "Trent". Not sure if he's freelance or is part of a company, will give him a call first thing tomorrow! Can anyone please recommend any other panel beaters around Brisbane (preferably Southside-ish)?

Cheers

CU2 Euro 09
09-09-2010, 11:00 AM
I've used BCM Body Repairs in Moorooka, 3848 3497. Was really happy with the results. Can't tell its had anything happen to it. Ask for Scott.

Kwangstuhhh
09-09-2010, 11:16 AM
Thanks for the info mate. Will give them a call if the guy Honda recommended isn't able to do the job (he's a touch up/buffing specialist). Sent him some photos so I don't have to go all the way to Westlake on Saturday for nothing.

MR_LATE
09-09-2010, 05:51 PM
um i use holmes body works, 0419 740 541 or 33905470, ask for peter. he i located at hemmant, near murrarie

albii
09-09-2010, 07:05 PM
Shipstones at Windsor

Kwangstuhhh
10-09-2010, 12:52 PM
Thanks for all the info guys, I showed the guy the pictures below and he said could probably buff and touch up most of the damages. Probably will cost me $60-80, what do you guys think? Seems pretty reasonable to me!

http://img716.imageshack.us/img716/996/dsc0001et.jpg
http://img828.imageshack.us/img828/7125/dsc0002cb.jpg
http://img255.imageshack.us/img255/3738/dsc0245n.jpg
http://img266.imageshack.us/img266/1830/dsc0003mn.jpg
http://img36.imageshack.us/img36/3182/dsc0244qd.jpg

nxn75u
10-09-2010, 04:00 PM
$60 - 80 seems pretty reasonable to me...

praja6
11-09-2010, 12:11 AM
I think its a reasonable price.

MR_LATE
11-09-2010, 03:03 PM
thats cheap

Kwangstuhhh
11-09-2010, 04:05 PM
Ok so I got it fixed by the touch up specialist the dealer recommended and this is the outcome:

http://img62.imageshack.us/img62/4848/dsc0004tj.jpg
http://img121.imageshack.us/img121/6052/dsc0003sg.jpg
http://img225.imageshack.us/img225/615/dsc0002yq.jpg

As you can see it's not a complete colour match =( But I think it's the best he could do considering my car is "Pearl White". I sent him email regarding the colour match issue just to double check if that's the absolute best he could do =S. Sorta surprised because most dealers go to him for any touch up issues. But at least from a distance you can't tell there's "damage" there...white marks are better than black! haha

nesterjester
11-09-2010, 08:43 PM
ah man white pearl is quite difficult to paint match, but considering he's a dealer associated "buff and touch up specialist" you would think he would have a paint-matched paint pen or something like that. Good idea sending him another email, would like to know how it pans out. But hey as you said its better being white marks than black marks!!

Kwangstuhhh
11-09-2010, 08:47 PM
Yeah pretty unfortunate...he's been in the business for 11 years and associates with like Austral and Motorama as far as I know. Was expecting a better job =(. Hope he can do something about it haha...

kodardavis
21-03-2012, 03:28 PM
Hey there..!!
I have been following your post since last six months and I must say I found so many useful stuff from here..!!

aldo10
21-03-2012, 06:38 PM
Shipstones at Windsor


used these guys and had excellent results. It was a few years back.

Didn't realise it was an old post