nwa111
09-09-2010, 06:23 PM
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim: Fixing up little black things on the rear windscreen of an integra or any little area thats rusted and you just want to spray black makes it look abit better...
Required: gloves , newspaper , spray paint , and paint masking tape so it does not leave masking tape marks on your car
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/026.jpg
Step1: Well Figure out the spot you want to spray , i did the two black buttons thing on the rear windscreen of my car due to it being hella rusted.. lol
Step2: cover it with news paper and cut it out , then mask around it with the paint masking tape like crazy to make sure you dont spray onto your rear windscreen
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/019.jpg
Step3:Mask on news paper around the area incase of over spraying i kinda overdid it here but theirs nothing wrong with being cautious.
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/021.jpg
Step4: After you finished masking everything shake your can like crazy to make sure no blotches of paint comes out , spray over the buttons on coats i did 3 on each button thingy
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/031.jpg
Step5: let it dry for about 15mins to make sure its hundred percent dry , after its dry do a second coat to make sure the paints on hundred percent and wont come off easy.. we kind of got bored waiting so we did this..
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/030-1.jpg
Step6: take off all the news paper and kapooww better looking button things lol
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/032.jpg
Other comments - i know abit useless but i thought i put it up anyways , and if anyone knows the real name of those button things..
Aim: Fixing up little black things on the rear windscreen of an integra or any little area thats rusted and you just want to spray black makes it look abit better...
Required: gloves , newspaper , spray paint , and paint masking tape so it does not leave masking tape marks on your car
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/026.jpg
Step1: Well Figure out the spot you want to spray , i did the two black buttons thing on the rear windscreen of my car due to it being hella rusted.. lol
Step2: cover it with news paper and cut it out , then mask around it with the paint masking tape like crazy to make sure you dont spray onto your rear windscreen
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/019.jpg
Step3:Mask on news paper around the area incase of over spraying i kinda overdid it here but theirs nothing wrong with being cautious.
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/021.jpg
Step4: After you finished masking everything shake your can like crazy to make sure no blotches of paint comes out , spray over the buttons on coats i did 3 on each button thingy
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/031.jpg
Step5: let it dry for about 15mins to make sure its hundred percent dry , after its dry do a second coat to make sure the paints on hundred percent and wont come off easy.. we kind of got bored waiting so we did this..
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/030-1.jpg
Step6: take off all the news paper and kapooww better looking button things lol
http://i830.photobucket.com/albums/zz224/POMILE/shayssss/032.jpg
Other comments - i know abit useless but i thought i put it up anyways , and if anyone knows the real name of those button things..