How to remove our front bumper?? CU2

[Meemoo]

I was trying to get the front bumper off this morning, but I couldnt remove those 8 clips(4 on each side) below the headlight, please help :(

[praja6]

I also got the same question how to remove the front bumper for CU2.. Just curiously why do you need to remove the front bumper?

Hope some expert will answer us here

[kimnkk]

I just tugged firmly with the help of a screwdriver to push up the first clip. Didnt break anything the two times i did it but you just gotta pull firm but not too hard!

[Meemoo]

praja6:

I am trying install those foglights.

kimnkk:

Thanks I will give it another try this weekend. :D

[Kwangstuhhh]

I just tugged firmly with the help of a screwdriver to push up the first clip. Didnt break anything the two times i did it but you just gotta pull firm but not too hard!
What he said!

What are you taking it off for? I took mine off to install my HIDs lol, will be taking it off again to install my Fog Lights soon :P

[nesterjester]

make sure you put a blanket or something down or when all the clips come off, your front bumper will be eating pavement! haha i almost did this, i was lucky i was ninja enough to save it.

[Kwangstuhhh]

make sure you put a blanket or something down or when all the clips come off, your front bumper will be eating pavement! haha i almost did this, i was lucky i was ninja enough to save it.
Haha yeah good point! I put down a huge piece of cardboard underneath lol...:thumbsup: on the ninja-ing :P

[Meemoo]

thats what I did for my rear,mats on the ground always a good idea,I managed to put those rear sensors in last saturday, the drill from "honda" is good,cut the hole like butter, but still not sure how can they change $60 for 1 drill bit...???which mean 60/4=$15 per hole.... before you guys say "WHAT!" (I did ring around all major hardware store but couldnt find a 19.5mm hole saw), very happy with the sensors so far and I will try to take that front bumper off again this weekend.

PS , if any of you needs to buy a genuine honda 19.5mm hole saw,specially designed for genuine honda parking sensors, NOW I have 1 for sale :) PM me with your offer! as I mentioned I only used it for 4 holes :p