DC2 Front Bar On DC4

[28RAG]

Hey guys... im an Accord-ian so my teg brain load is very low.

My mate has a 00 model which i understand is a DC4 and we're getting him a front bar for it but the kit shop has it listed for DC2 only....will this fit still...fit flush...anything can fit with duct tape but we want good fit

cheers

dave

[28RAG]

anyone?

[spoondc2]

anyone?
Sorry what is Front bar?

[hondar]

Hey guys... im an Accord-ian so my teg brain load is very low.

My mate has a 00 model which i understand is a DC4 and we're getting him a front bar for it but the kit shop has it listed for DC2 only....will this fit still...fit flush...anything can fit with duct tape but we want good fit

cheers

dave

is there a DC4? i thought there is only DC2 AND DB8 (4 door teg)

[spoondc2]

is there a DC4? i thought there is only DC2 AND DB8 (4 door teg)
DC4 is Integra Gsi, but i just dunno what is front bar, strut bar? if yes it sure fits

[Yspool]

I think he means a front lip or front body kit.....

[28RAG]

yeah front bar is a front spoiler/kit/etc

[joneblaze]

He means front bar = show car bodykit front bar

Yes it will be a direct fit. Basically all DC2 and DC4 parts are interchangeable, with the exception of some intakes and ABS related items.

[bennjamin]

Not so right - the front bar + bonnet + fenders + misc. of dc4 are not directly interchangeable of the later model DC2 integras ( 98 + i think ?!?) Earlier model integras are all the same dimensions i believe tho.

[spoondc2]

Not so right - the front bar + bonnet + fenders + misc. of dc4 are not directly interchangeable of the later model DC2 integras ( 98 + i think ?!?) Earlier model integras are all the same dimensions i believe tho.
i think there are also facelift version of dc4 so it just depends it's the same "model", it will be fine

[bennjamin]

i think there are also facelift version of dc4 so it just depends it's the same "model", it will be fine
Correcto.

93-97(?!) DC2/ DC4 fronts are interchangeable with each other....as are 98+DC2/DC4's with each other too :)

[spoondc2]

Correcto.

93-97(?!) DC2/ DC4 fronts are interchangeable with each other....as are 98+DC2/DC4's with each other too :)
Hehe thanks for correcting

[joneblaze]

That's interesting, I'm sure there is a member on OH who has a 98+ front bar on his 94+ DC....

[bennjamin]

That's interesting, I'm sure there is a member on OH who has a 98+ front bar on his 94+ DC....
ive been told there are numerous dimension differences between the early tegs + later dc tegs - front bar , fenders + bonnet are *minutely* different. The later tegs have a slightly more aggressive /angular look too - i guess its the same theory as fitting a EG hatch bar to a sedan and vice versa :)

[28RAG]

thanks heaps for that guys

[EG_2_TEG]

That's interesting, I'm sure there is a member on OH who has a 98+ front bar on his 94+ DC....http://www.teamintegrated.org/Ti/cruises/2ndcruise/page1/imagepages/image22.htm
to
http://www.teamintegrated.org/Ti/cruises/3rdcruise/imagepages/image44.htm
to
http://www.teamintegrated.org/Ti/cruises/6thcruise/page1/images/IMG_2305.jpg

and here's the diff between a series 1 and series 2 front end
http://www.teamintegrated.org/Ti/cruises/6thcruise/page3/images/6th%20Integrated%20cruise%2009-01-05%20075.jpg
the series 2 does have an ITR front including the ITR lip however...

[joneblaze]

http://www.teamintegrated.org/Ti/cruises/2ndcruise/page1/imagepages/image22.htm
to
http://www.teamintegrated.org/Ti/cruises/3rdcruise/imagepages/image44.htm
to
http://www.teamintegrated.org/Ti/cruises/6thcruise/page1/images/IMG_2305.jpg

and here's the diff between a series 1 and series 2 front end
http://www.teamintegrated.org/Ti/cruises/6thcruise/page3/images/6th%20Integrated%20cruise%2009-01-05%20075.jpg
the series 2 does have an ITR front including the ITR lip however...
*loves being right...* :D

[bennjamin]

*loves being right...* :D
:confused:

[Boost]

97 and pre 97 teggys are interachangable... 98+ are interchangable.

The 98+ front bumper will bolt straight onto the 97 and down teggys. But new headlights and corner lights are required. The old lights will not fit onto the 98+ bumper. The rear of the 98+ will fit straight onto all model g3 teggys.
Hope that helps.
Since we are on the topic.. Does anyone know anyone selling 98+ teggy headlight and corner lights?? If so please PM me..

[snowman95]

http://www.teamintegrated.org/Ti/cruises/2ndcruise/page1/imagepages/image22.htm
to
http://www.teamintegrated.org/Ti/cruises/3rdcruise/imagepages/image44.htm
to
http://www.teamintegrated.org/Ti/cruises/6thcruise/page1/images/IMG_2305.jpg

and here's the diff between a series 1 and series 2 front end
http://www.teamintegrated.org/Ti/cruises/6thcruise/page3/images/6th%20Integrated%20cruise%2009-01-05%20075.jpg
the series 2 does have an ITR front including the ITR lip however...
cheers omar, saves me from having to do it :thumbsup:

the torino red teg is mine

if you're looking to do a 98+ conversion for any dc2/dc4 Integra between 93+ to 97
all you need are the headlights, and indicators, everything bolts straight up, I went from a 95 to a 98+ (ITR front and lip) simple matter of just unbolting hte old and bolting up the new.

[Sp3rMz]

Does ur friend have alot of cash flow around? If so, instead of putting dc2 bar on do a whole JDM conversion :)~~~~~~~~~~~~~.