Rotors

[jyh888]

Hey guys, just wondering what aftermarket front rotors are S2000 owner's using?

Looked into DBA4000s and god they are hell expensive! Approx $400 per corner!! Seeing that they are same size as the 300mm DC5R/EP3R/FN2R rotors...the price is ridiculous...

Any cheaper options?? The reason why im asking is, im in the progress of a brembo conversion and for this i require the use of front s2000 rotors - i've purchased a set of EBC turbo groove rotors from the UK and they were relatively cheap ($380 delivered) but not sure if they will handle track abuse well...will test them and post a review.

If anyone has any other suggestions for reasonably priced rotors please let me know!

[vyets]

just get rda's

230 or something a pair.

[jyh888]

just get rda's

230 or something a pair.

RDAs are cheap but are worse than OEM, can't handle abuse at all, would be a great cheap OEM replacement though...

[vyets]

But you didn't want to spend on dba so I reccomended something cheaper. My rda's lasted 3 trackdays before they cracked, and I go pretty hard on brakes. They outlasted my pads ;) and for $200 you really can't go wrong.

[Ferrari]

3 track days on my RDA's, and they are farked but for $200 cant complain!

[jyh888]

$200 is actually pretty cheap...where are you guys getting them from for that price? Are they just hairline cracks or major cracks?

[EG5]

My RDA lasted for 3 trackdays
PM me dude

[vyets]

Full crack all the way through.
http://img29.imageshack.us/img29/972/rotorzr.jpg (http://img29.imageshack.us/i/rotorzr.jpg/)

PM EG5 for pricing, its abit over $200

[rastus]

I was also looking at rotors recently, and noticed that it seems to be much cheaper to get them from the US (stupid really.. DBA rotors are made in AUS aren't they..) In any case..

I was looking at the DBA 4000's slotted.
the four rotors inc shipping to Brisbane was about $US 830. Given the exchange rate atm it seems a bargain.

I was looking at horsepowerfreaks.com

--Shayne

[STAiN MASTER]

DBA 4000 series would be nice.

[9large]

Perhaps things have changed since, but we've had a couple of cracked DBA 4000 rotors in the past. Be careful.

[vyets]

Yea I've seen cracked dba 4000's before as well.

[dlai5552]

Sorry to bring up an 'old' thread.
I'm looking to purchase new front pads and rotors. Chosen to go with ACRE Super fighter Pads, but now deciding on Rotors.
I was thinking maybe of going with Password JDM Rotors. Has anyone tried these? or does anyone else have better opinions.
Plan is to track it a few times, I'm not a track whore! Mainly for the streets and track MAYBE 2-3 times a year.

[l3vnd1]

I too am after rotors.

Was looking for direct fit 2 piece rotors like the DBA5000's however can not find any to fit the S2000

Is there a reason for this? Does anybody know a brand that makes 2 piece for the S2000?

They are lighter and usually have an aluminium hat.

[vyets]

I too am after rotors.

Was looking for direct fit 2 piece rotors like the DBA5000's however can not find any to fit the S2000

Is there a reason for this? Does anybody know a brand that makes 2 piece for the S2000?

They are lighter and usually have an aluminium hat.

Project My scr pro

[l3vnd1]

Project My scr pro

Thanks

OUCH! $1490 for front pair!

[trism]

If it's not a track only car, 2 piece rotors are wank.

Sent from my custard cannon like Peter North.

[dlai5552]

Password JDM. Slotted and drilled. Great for the streets and occasional tracking. ~$200 shipped!
Try them out!

[9large]

What trism said. With those two-piece rotors, if you're not tracking you're just posing... The stock brake system is plenty.