Front lip for 04' CL9

[richard_k]

hey guys

wondering if it would look funny if i just got the front lip upgraded for my euro after i get new rims..it looks like a boat so round atm haha and where can i source one cheap?

cheers

[elitee]

I will look good depending on what lip you go for etc'

Most people go for euro R or Mugen.

JDMCONCEPT.COM.AU

HEELTOEAUTO.COM

Have a look at those 2 sites.

YOu will need a pre-facelift lip

[x10Hz]

coilovers before lip

[richard_k]

alright and do these lips just bolt on underneath the factory bumper or what..?

[x10Hz]

alright and do these lips just bolt on underneath the factory bumper or what..?

if its an OEM lip then yes, there are tabs underneath and screws in the sides that they go into. fitment should be 100%

[elitee]

I just got a question,

When you install a new lip, what can i do about installing fog lights i have a standard Euro [Has no fog lights]

[richard_k]

alright cool, so i was on the jdmconcept website and according to them you can get the euro r front lip ($700), rear lip ($775), left ($450) and right ($450) sideskirts for those amounts specified. Do these prices seem about right or should i shop around?

and elitee i think i saw some on heeltoeauto..they have the fogs you can buy to put onto the bumper for the CL9 :D

[x10Hz]

I just got a question,

When you install a new lip, what can i do about installing fog lights i have a standard Euro [Has no fog lights]

its all plug and play as far as i know in terms of the actual foglight. Not sure about the wiring tho.

[elitee]

its all plug and play as far as i know in terms of the actual foglight. Not sure about the wiring tho.

Yeah the wiring is what i was wondering about,

How i would make a switch for them etc

[x10Hz]

Yeah the wiring is what i was wondering about,

How i would make a switch for them etc

you may need to buy the foglight stalk from honda? and the harness also im guessing.. probs will have to run it to the fuse box etc... :S