brake annoying noise chiit..chiit...

[Samsico]

When I pressed brake pedal I could heard like noise chit..chit .. or tweet..tweet .. :eek: like a little bird on my front right wheel... what could be possible wrong ? pad brake is still normal any suggestions

[kj9438]

i had on my 08 ge 6 too. then i changed new pads , still had some noise ,but better than before .

[Gnat]

Visually inspect the disk/pad. Anything on it? Does it match the wheels rotation speed or is it slower?

[Aquilla]

You sure it's not coming from the pedal? mine chitts too but from the pedal, jus a little oil will fix it up but havent got around to it yet... you should get it checked out :O

[Samsico]

Hi thanks for your opinion, the noise coming from outside wheels and not from pedal inside. Funny things I will not hear if I reverse the car. The issue if when I slow down for red traffic lights I could hear unpleasant noise.

I took off the wheels off (right) and check on disc pad not found anything. Pad still thick in good condition I taken off and spray / sand and clean up one by one and I also bought a spray for free sequel to all the back of the plates (from US). Will find in a few days if still make some noise.
Something I found when I turn the steering all the way to the right and rotate the wheels, I could hear some noise of bearings moving around, is that normal ? check on left wheels hear I could hear same too.

At the rear right wheel, I took the Video from my HTC HD 2, sorry it was up side down. see and can you hear the noise..
When I rotated the Rotor disc does not like match or round flat kind of bend in some part and making some noise , was thinking I need to replace the Hub bearing or the rotor disc ? any idea.
http://www.youtube.com/watch?v=Rl12rKrLcnE

[Gnat]

Yeah it looks like the disk could be warped

[8700s14]

sounds to me although the bearing has some play in it which has lead to the rotor being damaged. Probably need to replace both!

[Samsico]

hi guys, I have replaced the rear hub bearing it's good now found out the disc is fined rotate smoothly, next will be replacing the front bearings as I could feel grinding vibration from my foots while the cars is rolling around 60Km/h.