PDA

View Full Version : removal of front bumper



kenshin
09-01-2005, 10:34 PM
hi guys...

had minor incident over the weekend at a mates place with his driveway...

my front bumper moulding's gettin weaker and the bolt thats holding it on the right hand side is pretty much tearing away the plastic... whole side bumper is loose... (left is still good)

anyway...

can anyone tell me how to remove the front bumper properly... and how i should go about 'resurfacing' the hole for the bolt...

5poon
09-01-2005, 11:00 PM
The front bumper is quite easy. Im not sure if this helps but from memory you have the row of screws under the hood which is quite obvious. Also a large bolt on either side under the hood. Once this is done then you also have a screw on each side just before your wheel facing upwards. Last screws to get are the few holding the plastic engine guard up.
Once these are all removed its a matter of CAREFULLY popping the plugs on either side. Should slide off perfectly.
I did this a few weeks ago no problems so I think I have it right. Willing to be corrected if I have forgotten something.
My tip would be to ask the help of a second person in removing your front when popping the sides. Can be a bit a little tight the 1st time.

5poon
09-01-2005, 11:04 PM
Btw, im happy to supply a diagram tomorrow of you are really struggling or if you are in Syd metro then im happy to come over and help a fellow Teg owner.

kenshin
10-01-2005, 01:02 AM
thx for the offer in melb thou...

any suggestions to fixin the bumper mount hole...

EK9
10-01-2005, 01:11 AM
hehe i'm sure he'll work it out... he's a smart arse ;) lol j/k

man i did the same thing to my car, i'll tell ya how to fix it.. don't go thru all that trouble yet... pm/msn done :D

Sp3rMz
10-01-2005, 01:13 AM
Its a very easy job if u wanna fix it toan. DIY it. Take if off then just get fibre glass kit and patch it up. Only thing thats costly is gettin the bar resprayed.

kenshin
10-01-2005, 01:13 AM
come over with ur bucket of fibreglass thingy that u used on ur speaker DIY vinh...
:)

that'll do the trick i think

EK9
10-01-2005, 01:20 AM
haha... read my diy again man... i f***d up, so no more resin! wasted like half of it... lol

u can always diy like tien said... fibreglassin that bit underneath the fender wouldn't require any painting, so it's all good :D

Sp3rMz
10-01-2005, 01:23 AM
Nothing some fibre glass and sand paper cant fix. DIY GONE WRONG STYLES. Actually vinh go help out toan with his kit so u can post another report :thumbsup: . Help people out.

EK9
10-01-2005, 02:42 AM
haha... man i ain't the write up/diy guy! lol.

actually i mite come by this week sumtime. we'll meet up ;) if ur up for it, i'll help ya where i can (do u know i'm like a full amatuer??) lol

Sp3rMz
10-01-2005, 02:44 AM
Yeah I'l cum round too just to check out ur neighbour toan and laugh at u guys stuff up.

kenshin
10-01-2005, 06:09 PM
lemme know when you guys are free... :)

weds -> fri is good for me this wk... taking time off

Sp3rMz
10-01-2005, 06:12 PM
Man you know me. I'm free when ever you guys want me to be free. I guess its up to Vinh wait for him to come home tonight and decide. Or even get kevin he has his own fibre glass kit and he supposively knows what his doing. BUt kevin sucks :P get ek9 down LOL.

BTW please keep it through pm or MSN from now on, getting off the topic. OH OH another suggestion. Take off your bumper fix it, sell it, then buy mugen :p SO SEXYYYYYYYYYYYY.

kenshin
10-01-2005, 07:32 PM
come in irc you dirtbag... i save msn for the ladies ;)

vinh said he's comin down east side this wk but doesnt know when exactly... ill buzz ya then

Sp3rMz
11-01-2005, 03:49 AM
Mr EK9 said he'l probably come down on Wednesday to help you with your bumper. I'l come too :D