PDA

View Full Version : Help: Delsol 1993 head unit wires


CRX_CRX
15-10-2010, 01:09 AM
hi guys, my sol got no memories (even the clock is back to 1 o'clock every time)since I installed the new head unit.

i think i connected wrong wires. Can someone PLz show me the diagram or anyone can help me out which wire, which colour is for the memories?

very appreciate
CRX_CRX
15-10-2010, 10:18 AM
bumps
Snoop_gee
15-10-2010, 11:16 AM
it depends on the deck ur using.
details on the deck would help better.

Mods. this topic belong in Audio.
CRX_CRX
15-10-2010, 08:31 PM
dont think it depends on the deck brus..:(
dc292177917
15-10-2010, 09:37 PM
which clock do u mean?
the one on cluster or yr head unit?
CRX_CRX
16-10-2010, 01:29 AM
the one the Cluster :) , even tho everytime i turn ignition on it will restart to 1:00 PM or the head unit back to "tune" mode
dc292177917
16-10-2010, 03:53 AM
try to unplug the headunit to see if the cluster clock will still reset first ;)
tRipitaka
16-10-2010, 08:14 AM
maybe check your backup fuse and see whether it has blown or not.

this fuse should be in your engine bay
civic88
19-10-2010, 07:12 PM
u need to ensure that your memory wire on your deck is connected to 12v, many people make the mistake of connecting it to the ignition/accessories wire
CRX_CRX
20-10-2010, 12:27 AM
u need to ensure that your memory wire on your deck is connected to 12v, many people make the mistake of connecting it to the ignition/accessories wire

thanks for the information, do you know what colour is for the memory wire?
CRX_CRX
20-10-2010, 12:30 AM
u need to ensure that your memory wire on your deck is connected to 12v, many people make the mistake of connecting it to the ignition/accessories wire

thanks for the information, do you know what colour is for the memory wire?
civic88
20-10-2010, 03:38 PM
depends on the deck but in pioneer decks the yellow wire need to be connected to a constant 12v and the red wire is generally connected to the accessories, people tend to mix up the two wires hence the deck doesnt retian its memory
OPL33Z
20-10-2010, 10:56 PM
i had this same problem!
i tried swapping the wires, still didnt work.
however i will check the fuse

but i think the yellow wire isnt connected to a 12v source.
so in that case, what exactly should i run a wire to, so i can retain the memory?