rev gauge not working

[egb16b]

hey guys my rev gauge in my eg just stopped working all of the sudden.

the cluster is an eg6 cluster.

Can this be fixed or is the cluster stuffed??

cheers.

[quangsuke]

most likely the pin isn't intact properly with the gauge. take it apart and push the pin down.

other then that it probably isn't matching up that well so wind it back anti clock wise until u get it right.

[ralph_ef9]

if u have another cluster just swap it, if the spare one works means ur eg6 cluster is gone.

[egb16b]

yeah i still have the stock one.. i'll swap it wheni have some spare time.

the needle has swung all the way around and has stopped where it should start.. but on the other side of the pin.. and just sits there.

arghh!!

[quangsuke]

yeah i still have the stock one.. i'll swap it wheni have some spare time.

the needle has swung all the way around and has stopped where it should start.. but on the other side of the pin.. and just sits there.

arghh!!

like i said ur gonna have to turn it anti clockwise a few times so it starts working right. seems to be common with eg6 clusters.