PDA

View Full Version : Tranny fluid filling questions.



b4dnuf
25-10-2010, 09:41 AM
Hey Guys really really noob question.
I tried to do the Tranny fluid over the weekend but without a breaker bar i was unable to remove the filler bolt for the tranny.
can i fill it using the little filler whole with a black cap on top of the Gearbox or do i just wait till i get a breaker bar and remove the Filler bolt?

Cheers..

quangsuke
25-10-2010, 10:30 AM
u can use a pole and attatch it to your ratchet handle extending the length (diy breaker bar). by using the top filler hold u can't tell how much u have poured in unless u measured how much fluid was there in the first place.
keep at trying to get that filler hole open i say.

Zilli
25-10-2010, 05:28 PM
^ good advice... the method of checking that you have the correct amount is to pour until you have fluid come out of the top hole

Lukey
25-10-2010, 08:34 PM
you should always take out the filler plug before the drain plug!