eg b18c

[papie]

hey guys i have a eg gli and want to put a b18c in it so i got my self a smashed dc2 vtir so i have everything i need. but i need to find out about the ecu what mods do i have to do to get it working the dc2 i have is a 94 model will this just plug and play??

[Symphorced]

Plenty of threads have covered this topic before. Do a search and you'll find out everything you need in these forums. For starters here's two threads which will be of interest to you.

http://www.ozhonda.com/forum/showthread.php?47020-Motor-Change-guide-for-EG-*-B-D-H-K-SERIES-!!!!
http://www.ozhonda.com/forum/showthread.php?t=30312

[duzy]

pretty much just need a vtec wire from motor to ecu. as both motors are obd1 should be pretty straight forward.

[papie]

pretty much just need a vtec wire from motor to ecu. as both motors are obd1 should be pretty straight forward.

even if i use the ecu that comes with the dc2?

[chauster]

Yeah mate. Just chuck everything from the dc2 into your eg. go read up theres lots of topics mate.

inb4 close