Engine Stand

[xclusive_eg8]

ok guys, so im sure a few of yous would have pulled engines out before, Whats the best place on the block to secure to the engine stand?? Having a bit of issues with a D series

[e240]

where the gearbox mounts to the block

[jdm_b16a]

Ok guys, so I'm sure a few of you would have pulled engines out before, What's the best place on the block to secure to the engine stand?? Having a bit of issues with a D series

D Series should be like any other engine. I've done a few and there shouldn't be an issue. Two bolts at the top; two at the side (at about 7 o'clock and 5 o'clock.)

The two top ones are long bolts - I use the bolts from the gearbox. The bottom two you can use any long bolts and attach a nut to the other end as they will go right through the attachment point. As e240 said, you use the bolt locations where the gearbox attaches.

Peter

[xclusive_eg8]

this is the first time im actualy using an engine stand lol, usually had enough grass to dump engine on... But il have a but of a play once this rain clears up, hopefully soon