[CU2] My Pearl White MY10 CU2

[yungquan]

Hello OzHonda'ers

After a long long time lurking around this forum, I have decided to finally introduce myself to you guys with my car being more presentable after a few small mods.

its a 2010/11 model Pearl White Luxury

Here are some pictures :) feel free to comment

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/10.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/8.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/5.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/4.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/3.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/1.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/2.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/6.jpg

[felixd]

wheel specs :)

[yungquan]

wheel specs :)

Yo Felix! Haha

Fronts: 19x8.5 ET+41
Rears: 19x9.0 ET+40

245/40/19 tyres :D

[euroRwannabe]

Looking damn fine! Should post this in the "cu2 mods" thread, we need some new modders in there haha. Loving the wheels. Great job.

[white_ep3_civic]

That is looking real nice. Love euro's in white

[travisg]

looks hot bro,very clean,perhaps loose the roof racks

[TurBIce]

nice!!
Q bout your roof racks.

We have no choice but to get those clips on the sides? because we dont have gutters?

Is that the original honda roof racks?

[yungquan]

Looking damn fine! Should post this in the "cu2 mods" thread, we need some new modders in there haha. Loving the wheels. Great job.

Thanks man, I will start loitering in that thread real soon :D


That is looking real nice. Love euro's in white

Thanks ep3


looks hot bro,very clean,perhaps loose the roof racks

Thanks travis. Roof racks were put there on purpose man..lol....its a love/hate relationship :angel:


nice!!
Q bout your roof racks.

We have no choice but to get those clips on the sides? because we dont have gutters?

Is that the original honda roof racks?

yup. There are no OEM mounting points on the euro. So those metal clamps are the only way unless you want to weld on the roof (don't do that). haha

But the clips themselves comes with rubber strips which protect from scratches. I have removed them once to inspect for scratches and to my surprise, not a single dot was made by them.

[MR_LATE]

u know what? somehow even with the roof racks,, still looks effin hot, didnt really notice it in the edited photos. :D

[Golf_R]

Helloooooooooooo white euro..

I...I have always wanted a white....white looks sporty and young....til i got mine white Cu2....it looks cool but..its so damn easy to get dirty...
now i think black is the best.........black feels more luxury...

[yungquan]

u know what? somehow even with the roof racks,, still looks effin hot, didnt really notice it in the edited photos. :D

LOL thank you thank you...its not so obvious in the pictures i posted haha. Here's one where the roofracks are more obvious :

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/CamWhoreGalore/A.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/SSR%20Viena%20LM9/IMG_3082.jpg


Helloooooooooooo white euro..

I...I have always wanted a white....white looks sporty and young....til i got mine white Cu2....it looks cool but..its so damn easy to get dirty...
now i think black is the best.........black feels more luxury...

im feeling your pain man. But its a small price to pay for having a white car :)

[white_ep3_civic]

Helloooooooooooo white euro..

I...I have always wanted a white....white looks sporty and young....til i got mine white Cu2....it looks cool but..its so damn easy to get dirty...
now i think black is the best.........black feels more luxury...

I hate my black car. IMO white cars are the best. Not as much maintenance. With black cars you got to keep polishing it to keep the swirl marks out of it. I prefer a white car.

[biggame]

nice rim choice!!! i like!!!

[Lemonhead]

love you rims and i don't mind the roof rack, looks 'action-packed', kind of flow with the shape of the car.
white Cu2 - Da Best !!
hey, can you tell me, did you have to roll your guards at all to leave room for those 19' rims?
cos i noted that you have an offset of 40/41 and 245 tyres, they must be sitting just flush.

[gReY-oNe]

hey there nice car :) just curious did u lowered the car at all?

[Rudy]

very nice rims ! and x 2 to above...it looks lowered...if not thats damn good to be that little gap at stock height.

[nesterjester]

hey mate car looks fresh! good work

[yungquan]

I hate my black car. IMO white cars are the best. Not as much maintenance. With black cars you got to keep polishing it to keep the swirl marks out of it. I prefer a white car.

Yeah man. White = best colour to hide swirls. :D


nice rim choice!!! i like!!!

:D


love you rims and i don't mind the roof rack, looks 'action-packed', kind of flow with the shape of the car.
white Cu2 - Da Best !!
hey, can you tell me, did you have to roll your guards at all to leave room for those 19' rims?
cos i noted that you have an offset of 40/41 and 245 tyres, they must be sitting just flush.

yup. Guards required rolliing. But thats because i insisted on retaining the actual overall diameter. Can get away with 235 tyres but because oem tyres are 98Y rated, its really really rare for a 235 tyre to be rated anywhere close to 98 load rating :(


hey there nice car :) just curious did u lowered the car at all?


very nice rims ! and x 2 to above...it looks lowered...if not thats damn good to be that little gap at stock height.

Yeah. Car was lowered with Eibach Pro-Kit. Not 100% sure about the drop height but its just nice. No gaps between tyres and wheel arch. Car sits exactly 10mm from ground at the front tyre wind deflector.


hey mate car looks fresh! good work

Thanks Nester :)

[yungquan]

Keeping up my habit of teasing the eyes for mods, :D here's a scoop shot of the boot which will/might be completed in a couple of month's time
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Boot%20Setup/IMG_2662.jpg

[TurBIce]

I use to have a black FD civic! what a pain in the ass!!
I swore to never get black again,
so i got my white CU2 :)

These clip on racks easy to put on and remove?

dont need to do any other mods?

I want racks!!!

Thinking of which brand now:) i saw the thule ones with that front wind deflectors. looks pretty hot.

[nxn75u]

Nice choice of wheels and loving the USDM look. What happen to your old wheels?

[SajadEG]

drop it a bit more, and keep the roof racks...are they directly above the sunroof?

[yungquan]

I use to have a black FD civic! what a pain in the ass!!
I swore to never get black again,
so i got my white CU2 :)

These clip on racks easy to put on and remove?

dont need to do any other mods?

I want racks!!!

Thinking of which brand now:) i saw the thule ones with that front wind deflectors. looks pretty hot.

nah they are not hard to remove. I tried removing the roofrack once after installing at the shop just to see how hard it is. Took less than 10minutes to remove all the mounting. 1 thing though, lifting it off the roof requires some kungfu skills if you are doing it yourself. lol

Are you talking about the fairings at the front for Thule ones? they are HAWT MAN!

For your reference, my roof acc. consists of:

ProRack WhispBar crossbars
and
2X Thule 591 ProRide


Nice choice of wheels and loving the USDM look. What happen to your old wheels?

Thanks nxn....USDM is kind of the path im leaning towards. Might end up to be a mix of everything ! LOL...
Stock wheels are resting at home and will be used the moment i can't afford new tyres for the wheels now haha


drop it a bit more, and keep the roof racks...are they directly above the sunroof?

I really want to drop it more but it will only mean less comfortable ride. might use other means of making the car look lower(e.g bodykit :P)
yes, the front cross bar sits right across the sunroof. only downside of having the racks :(

[akzz]

Gandu! Welcome to the forums officially now haha

[SPQR]

It's wonderful. Nice number plate too.

[yungquan]

Gandu! Welcome to the forums officially now haha

haha...yesh its offffficial lol~


It's wonderful. Nice number plate too.

thats the yung style plates haha

Here are some pictures of the CU2 on track...IMO...it looks "at home" in the track :D

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Winton%20TrackDay/9.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Winton%20TrackDay/4.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Winton%20TrackDay/1.jpg

[nxn75u]

Oh what i meant was the previous HRE wheels that you got. I love that rims on your car too.. oh wait was it your car or am i wrong? hahaha....

[yungquan]

Oh what i meant was the previous HRE wheels that you got. I love that rims on your car too.. oh wait was it your car or am i wrong? hahaha....

Oh...lol got me confused there...you mean this?

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/shoe/IMG_0878.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Monash%20Photoshoot/IMG_1054.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/MISC/IMG_1277.jpg

They are iForged wheels
I love them too but the offset was not too suitable for CU2. Of course if i wanted i could have made it fit but to do that, i'd need to have more than 3degrees camber, or flare those guards ALOT. Which i wasnt game enough to do! lol
thats why i did not lower the car that time :(

[nxn75u]

Wow aggressive offset i should say.. the wheels stick out so much... Flush look! hahhaa... I was looking for rims at that time and came across your wheels for sale by the other seller. But then was too late and then saw it on your car in another forum.. hahaha..

BTW 2 thumbs up for your modifications!

[euroRwannabe]

so yungquan, where abouts in victoria are you from! :D

[yungquan]

Wow aggressive offset i should say.. the wheels stick out so much... Flush look! hahhaa... I was looking for rims at that time and came across your wheels for sale by the other seller. But then was too late and then saw it on your car in another forum.. hahaha..

BTW 2 thumbs up for your modifications!

yeah man...ite pretty fkn aggressive! lol...looks good but its a pain to drive around as a daily if i were to use it. Thats y i downsized to 19 from 20. LOL

Thanks man! :D always makes me happy when ppl appreciate mods..


so yungquan, where abouts in victoria are you from! :D

yo euroR! im around the cbd area and s/e suburbs.. yourself?

[gReY-oNe]

what camber u running at the front and rear?

[yungquan]

what camber u running at the front and rear?

Front has no camber at all i think.
Rear has about 2.5 degrees of natural camber after i got the car lowered. :D

[euroRwannabe]

yo euroR! im around the cbd area and s/e suburbs.. yourself?

northern suburbs, but drive around often. might see you :D i'll give you a random toot if i do

[gReY-oNe]

Front has no camber at all i think.
Rear has about 2.5 degrees of natural camber after i got the car lowered. :D

oh ok.. can u get rear camber kit ?

if i want 20" would i be running the same offset like you

[yungquan]

northern suburbs, but drive around often. might see you :D i'll give you a random toot if i do

Make sure you TOOT louder! haha


oh ok.. can u get rear camber kit ?

if i want 20" would i be running the same offset like you

Yup you can get camber kits for front and rear to correct the natural camber you get after getting the car lowered. But im more inclined to not get them. 2.5 degrees is fine'ish in terms of camber wear. plus, i like the way it looks HAHA

for the 20s you are getting, it really depends on the width you are after.

Front: 20x9.5 et +35 shd be right at the edge of the guard = FLUSH and you will need really narrow tyres + rolled guards
Rear: 20x8.0 et +35 is flush with the front guards <---- this is proven

[yungquan]

And the sound installation begins:

Starting with trimming the speaker surrounds at the door card
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG_4563.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG_4565.jpg

Forgot to measure the thickness...but here's the self made spacer for the speakers
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG_4566.jpg

Boot panel removed to gain access to the factory amp
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG_4556.jpg

Rough idea of the final set up...this might change a little
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG_4552.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG_4555.jpg

Tweeter surround
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/Tweeter%20Surround/IMG_1374.jpg

to this:
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/Tweeter%20Surround/IMG_1828.jpg

and finally to this:
http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/Tweeter%20Surround/IMG00491-20110227-0027.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/Tweeter%20Surround/IMG00487-20110227-0022.jpg

Thats all for now ...more to come as work progress :)

[adhunt99]

Best white one I've seen. I actually like the roof rack look, something different.

[MR_LATE]

thumbs up**

[yungquan]

Best white one I've seen. I actually like the roof rack look, something different.


thumbs up**

Thanks man.

Sound deadening for front doors will be done soon...then the wiring...then...... :(

[JustRight]

Looking Good Yung :thumbsup:

I particularly like the tweeter surrounds. I just fitted my Focal's into the factory fittings without mods.

One thing you might need to do is lightly trim down the double ring of plastic that runs around the outer edge of the speaker grille on the inside of the front door trim.

I had to trim mine right down until the two raised edges were completely level with the background. You should end up with a completely flat ring around the grille. The reason is that on full extension my Focal 165VR's butyl suspension could touch the door trim and made a really nasty noise. They did not need much extra clearance, just a couple of millimeters. It's hard to see until you fit the speakers and power them up, and it also depends on just how much extension you get from your drivers.

Something like this:
http://www.overclockers.com.au/pix/image.php?id=sdgo7&f=1'
Click to view full size! (http://www.overclockers.com.au/pix/index.php?page=image&id=sdgo7)

Look forward to more updates.

Cheers.

[yungquan]

Looking Good Yung :thumbsup:

I particularly like the tweeter surrounds. I just fitted my Focal's into the factory fittings without mods.

One thing you might need to do is lightly trim down the double ring of plastic that runs around the outer edge of the speaker grille on the inside of the front door trim.

I had to trim mine right down until the two raised edges were completely level with the background. You should end up with a completely flat ring around the grille. The reason is that on full extension my Focal 165VR's butyl suspension could touch the door trim and made a really nasty noise. They did not need much extra clearance, just a couple of millimeters. It's hard to see until you fit the speakers and power them up, and it also depends on just how much extension you get from your drivers.

Look forward to more updates.

Cheers.

Thanks for that piece of info man! :D i will keep an "ear" when i have them running...not sure if they are touching myself as well. hmmmm fingers crossed they are not touching :)

some final pictures of the build before everything gets done (i hope) this weekend.

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG00084-20110319-2352.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG00087-20110320-1246.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG00085-20110320-0040.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG00104-20110324-0852.jpg

[denot]

LOL I love the coins compartment install. really fit!

[yungquan]

One thing you might need to do is lightly trim down the double ring of plastic that runs around the outer edge of the speaker grille on the inside of the front door trim.

Cheers.

I think you are RIGHT!!!!....wired up everything last night and after awhile listening to some songs, i can hear "plasticy" noise...BUGGER!!!..now i gotta remove the door trims AGAIN!
:(


LOL I love the coins compartment install. really fit!

Yeah man..i was so happy they went in and fits snuggle! :D

[yungquan]

A little bit of light show~

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Sound%20System/The%20Works/IMG_4765.jpg

[Lemonhead]

awsome looking.. thumbs up

[felixd]

Very nice progress Yung !!!

[Atjo]

Nice one Yung, after audio get bodykit hehe

[yungquan]

awsome looking.. thumbs up


Very nice progress Yung !!!


Nice one Yung, after audio get bodykit hehe

Thanks thanks :D:D

Dan: Bodykit......i want!!!! soon soon... trying to stay off cop radar for awhile after the last car haha

[yungquan]

Something else arrived a few weeks ago :)

http://i129.photobucket.com/albums/p229/yqtan1/For%20Sale/IMG00090-20110320-1611.jpg

[felixd]

beep beep :D

[mikey72]

very usdm, love it!

[demoiree]

no way :eek: ... how much you paid for your Tru-Tech C7? is it a 4 ch or 2ch?

[yungquan]

beep beep :D

Quack quack :P


very usdm, love it!

Thanks Mikey


no way :eek: ... how much you paid for your Tru-Tech C7? is it a 4 ch or 2ch?

demoiree....i have both 2 and 4 ch in the boot now. 2 for the sub...and 4ch for the splits

They are similar to tru-tech, made by same company but rebranded as Consonance :)

[demoiree]

demoiree....i have both 2 and 4 ch in the boot now. 2 for the sub...and 4ch for the splits

They are similar to tru-tech, made by same company but rebranded as Consonance :)

Hi Yungquan,

how much you paid for them? where you get them from? I used to be a SQL enthusiast back in my country , however after migrated here i'm absolutely isolated from them , since high ended SQL equip are very hard to find and cost a fortune! :thumbdwn:

[yungquan]

Hi Yungquan,

how much you paid for them? where you get them from? I used to be a SQL enthusiast back in my country , however after migrated here i'm absolutely isolated from them , since high ended SQL equip are very hard to find and cost a fortune! :thumbdwn:

Info on amps PM'ed. :)

[demoiree]

Hi Yungquan,

I've recently DIY to revamp the stock audio system, current configuration is:

Stock -> AMP -> speaker-out-> Audiocontrol EQS-> TruBillet -> Morel Elates 6

the frustrating thing is , i'm hearing moderate level of hissing from the tweeter , it is quite apparent when playing piano music(when a key strikes the sound got distrorted) , i'm suspecting the speaker level out is introducing such noise...

I did try to tap on to the pre-amp out but the problem is i'm unable to control the volume from the Head Unit .

I'm interested to know did you experience such problem? did you tap in to the preamp out for your audison bitone?

Cheers

[yungquan]

Hi Yungquan,

I've recently DIY to revamp the stock audio system, current configuration is:

Stock -> AMP -> speaker-out-> Audiocontrol EQS-> TruBillet -> Morel Elates 6

the frustrating thing is , i'm hearing moderate level of hissing from the tweeter , it is quite apparent when playing piano music(when a key strikes the sound got distrorted) , i'm suspecting the speaker level out is introducing such noise...

I did try to tap on to the pre-amp out but the problem is i'm unable to control the volume from the Head Unit .

I'm interested to know did you experience such problem? did you tap in to the preamp out for your audison bitone?

Cheers

i Tapped mine pre-amp and am having the same exact problem as you man. I thought tapping it post-amp will solve the problem but it seems from your post, it doesnt solve it..hmm...

i will retap it post-amp and see if it works. I HATE THIS!!! :(

[demoiree]

i Tapped mine pre-amp and am having the same exact problem as you man. I thought tapping it post-amp will solve the problem but it seems from your post, it doesnt solve it..hmm...

i will retap it post-amp and see if it works. I HATE THIS!!! :(

Hi Yungquan,

Sad to hear that the pre-amp output does it as well.. now i'm starting to think it is my amp. I will try connecting my Ipod straight to the AMP and see if i'm still hearing the hiss/clipping. I suspect the AMP is not grounded properly hence the introducing such noise to the tweeter ..

Will keep you updated

[yungquan]

Hi Yungquan,

Sad to hear that the pre-amp output does it as well.. now i'm starting to think it is my amp. I will try connecting my Ipod straight to the AMP and see if i'm still hearing the hiss/clipping. I suspect the AMP is not grounded properly hence the introducing such noise to the tweeter ..

Will keep you updated

I connected my Ipod into the auxilary of BitOne and it works perfectly fine. So my guess is the problem coming from our actual HU. If all else fails, ill put in an aftermarket HU :(

[yungquan]

Some recently taken pics :)

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/14.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Photoshoot%20by%20XVision%20Photography/16.jpg

[marquee]

I have rhino racks I use them for my snowboards so convenient they come off in summer though the wind annoys me and there the quiet ones super easy to put on and off

[demoiree]

hi yungkuan,

I've tried using my ipod , however the noise is still audible ! i start to suspect it is my amp or tweeter . Where did you ground your amp? did you scrape the metal to ground your amp?

Cheers

[yungquan]

I have rhino racks I use them for my snowboards so convenient they come off in summer though the wind annoys me and there the quiet ones super easy to put on and off

Yup! i only put them on when i need it...freaking noise from the Thule Bike Carrier...
I've got ProRack Whispbar which are suppose to be quiet...BUT with the Thule attachment, it kills the whole point of having the Whispbar ...arghhh


hi yungkuan,

I've tried using my ipod , however the noise is still audible ! i start to suspect it is my amp or tweeter . Where did you ground your amp? did you scrape the metal to ground your amp?

Cheers

hmm...weird innit? i grounded the amp just below the rear seat in one of the seat belt mounting points. and yes, they were sanded back to the metal :) try that, might work maybe

[demoiree]

Hi Yungquan,

Will try that tonight , another thing is , did you manage to integrate your system with the honda bluetooth? i think there is a switch when the bluetooth is active , but i think it is wired to the stock wiring which feeds the stock speaker , not sure where is that switch located .. do you have a clue?

Cheers

[yungquan]

Hi Yungquan,

Will try that tonight , another thing is , did you manage to integrate your system with the honda bluetooth? i think there is a switch when the bluetooth is active , but i think it is wired to the stock wiring which feeds the stock speaker , not sure where is that switch located .. do you have a clue?

Cheers

i dont have the stock honda bluetooth system unfortunately. Ive bought an aftermarket one but haven't had time to connect it yet. Try getting a wiring instruction or for your system. Might help

[yungquan]

Coils went in today + new thinner tyres = results as below:

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/ecb8f97255290861042632aea30031af.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/841282aab46a52ffd1ee63006bdf2f62.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/IMG-20110831-00572.jpg

[marquee]

Only thing I can say is you need bigger wheels but still looks sick

[demoiree]

to be honest , the first photo(rear wheel) looks like the wheel is too small with thin tyre , maybe because of the bulky body, need to upgrade to a bigger wheel ! lol

[boleh]

Does any1 have a CU2 + White + Modulo kit + Red badge + Original 18"s

Would love to see one

[euRo_noob]

Does any1 have a CU2 + White + Modulo kit + Red badge + Original 18"s

Would love to see one

I don't have the full kit. Only the rear and sides (sides aren't on yet). Also, car will be lowered this Sunday hopefully.

AND DAMN YOU YUNG! Such a dope drop...... Dare you to keep it late low.. Be Reece and Jason LOL.

Edit: Here's the image. iPhone pic. Did you want another angle? But if you want another angle.. (eg, the front), I don't have the Modulo front, I have the "Type S" lip.

http://img607.imageshack.us/img607/2244/img1122sl.jpg (http://imageshack.us/photo/my-images/607/img1122sl.jpg/)

Edit 2: Yung's running 19" wheels.. I think it's just cause the tyres are more thin now that they look small. Did you get any other pics of the car Yung? Pics of the whole car?

[boleh]

Thanks euro_noob. Very nice.

Yes I wouldn't mind another shot from the front

[Rudy]

They dont look small to me? Looks perfect. What coilovers did you go with mate?

[euRo_noob]

PM'D boleh.

@Rudy, BC BR.

[yungquan]

They dont look small to me? Looks perfect. What coilovers did you go with mate?

hey Rudy, they are BC Racing Br Series coils :)

Hang in there guys, this is not complete yet!
:p

[yungquan]

here's a final pic of it being this low....have since raised it..lol

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/332260_10150277117222965_658002964_7958424_2384811 _o.jpg

[MR_LATE]

nice bricks

[yungquan]

nice bricks

lol......ya man....freaking car blocking the bottom part of the bricks :P

.........ok....some proper pictures taken today :)

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Melvin%20Tang%20Photography/290215_10150278938156596_702406595_8387938_450893_ o.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Melvin%20Tang%20Photography/325974_10150278938601596_702406595_8387950_1285905 _o.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Melvin%20Tang%20Photography/326353_10150278938311596_702406595_8387940_6124413 _o.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Melvin%20Tang%20Photography/336103_10150278938401596_702406595_8387941_7577415 _o.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Melvin%20Tang%20Photography/04f4fa260d0bbd33d281d9c48737766f.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Melvin%20Tang%20Photography/210853_10150278938251596_702406595_8387939_5994523 _o.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/Melvin%20Tang%20Photography/329689_10150278938816596_702406595_8387952_6504938 _o.jpg

[MR_LATE]

somme how the roof racks makes the car fit in with consctruction background. good choice. just like slowing wont wont kill u :D

[Lemonhead]

nice shots, especially the views from the rear tires! :thumbsup::thumbsup::thumbsup:
I think I saw your car parked in the city recently. How low profile are the Continentals 245/30?

[yungquan]

somme how the roof racks makes the car fit in with consctruction background. good choice. just like slowing wont wont kill u :D

LOL...no slogan behind this time :(


nice shots, especially the views from the rear tires! :thumbsup::thumbsup::thumbsup:
I think I saw your car parked in the city recently. How low profile are the Continentals 245/30?

Thanks thanks.. do u live around there ? we shd all meet up one day man...seeing another modified cu2 is so uncommon :(
the contis are 235/35 which is totally unusable.... 87Y load rating FTL...PLUS....its too small man...lol..have since changed to 245/35 now :)

[felixd]

nice clean example CU2 good job bro

[MingZai]

Nice hope seeing this beauty at the Ozhonda Victoria meet!!

[1six8]

I don't have the full kit. Only the rear and sides (sides aren't on yet). Also, car will be lowered this Sunday hopefully.

AND DAMN YOU YUNG! Such a dope drop...... Dare you to keep it late low.. Be Reece and Jason LOL.

Edit: Here's the image. iPhone pic. Did you want another angle? But if you want another angle.. (eg, the front), I don't have the Modulo front, I have the "Type S" lip.

http://img607.imageshack.us/img607/2244/img1122sl.jpg (http://imageshack.us/photo/my-images/607/img1122sl.jpg/)

Edit 2: Yung's running 19" wheels.. I think it's just cause the tyres are more thin now that they look small. Did you get any other pics of the car Yung? Pics of the whole car?

hehehe...looks almost like mine...looking good so far.....

[Rudy]

beautiful man... Just a small suggestion, maybe get tinted windows ? If you ever need a rear camber kit, I got a cu2 one for sale

[private]

I don't have the full kit. Only the rear and sides (sides aren't on yet). Also, car will be lowered this Sunday hopefully.

AND DAMN YOU YUNG! Such a dope drop...... Dare you to keep it late low.. Be Reece and Jason LOL.

Edit: Here's the image. iPhone pic. Did you want another angle? But if you want another angle.. (eg, the front), I don't have the Modulo front, I have the "Type S" lip.

http://img607.imageshack.us/img607/2244/img1122sl.jpg (http://imageshack.us/photo/my-images/607/img1122sl.jpg/)

Edit 2: Yung's running 19" wheels.. I think it's just cause the tyres are more thin now that they look small. Did you get any other pics of the car Yung? Pics of the whole car?


LOLOL
love your car yung. Yes i be trollin ozhonda, stalkin yo shit.

[yungquan]

Hello again. Been awhile...just reliving this thread for the final few pictures of this car as I will be parting out and selling the car soon :(

more to come soon.

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/8588294581_8d9d0f2719_h.jpg

http://i129.photobucket.com/albums/p229/yqtan1/EURO%20CU2/46206_10151130587422965_1840849971_n.jpg

http://i129.photobucket.com/albums/p229/yqtan1/IMG_1591.jpg

http://i129.photobucket.com/albums/p229/yqtan1/IMG_1592.jpg

http://i129.photobucket.com/albums/p229/yqtan1/IMG_1618.jpg

[antony]

This Euro looks WAY better than the Subaru...

[3chiii]

This Euro looks WAY better than the Subaru...

agreed,

this car is come along way since, good work! the modulo kit is sex, In my opinion better then the type s.

[Snoop_gee]

you said your parting out... but i dont see the wheels being advertised.
do you have the stockies and are those for sale/?

[yungquan]

This Euro looks WAY better than the Subaru...


agreed,

this car is come along way since, good work! the modulo kit is sex, In my opinion better then the type s.

Thanks guys :)


you said your parting out... but i dont see the wheels being advertised.
do you have the stockies and are those for sale/?

Yes I still have the stockies but its going back onto the car soon and those ssr lm9s will be up for sale once this is done. I just can't find the motivation to do it yet. Want more time with the car :(

[mrgu]

good work with the CU2...I prob have to skip CU2 now and wait for the next Euro 2014

[yungquan]

http://i129.photobucket.com/albums/p229/yqtan1/8609620828_1720804eb4_h.jpg

http://i129.photobucket.com/albums/p229/yqtan1/8609620166_284cdd8f76_h.jpg

http://i129.photobucket.com/albums/p229/yqtan1/8609618710_e7a83ff38f_h.jpg

http://i129.photobucket.com/albums/p229/yqtan1/8609618142_49b7b287c5_h.jpg

http://i129.photobucket.com/albums/p229/yqtan1/8609615954_f8d4cbe02a_h.jpg

http://i129.photobucket.com/albums/p229/yqtan1/8608513139_27d274c343_h.jpg

http://i129.photobucket.com/albums/p229/yqtan1/8608511151_136e285cb1_h.jpg

And....my dream shot which i have finally got it done :)

http://i129.photobucket.com/albums/p229/yqtan1/8608510351_70454ec1d6_h.jpg

[mrgu]

Need a set of pedals and door sills to finish it off!

10 speaker not good enough?

[yungquan]

Need a set of pedals and door sills to finish it off!

10 speaker not good enough?



Lol..i actually disconnected all the stock speakers and replaced with with only a 2-way split and a 10-inch subwoofer :)

[yungquan]

And here are the final few pictures :)

http://i129.photobucket.com/albums/p229/yqtan1/4.jpg (http://s129.photobucket.com/user/yqtan1/media/4.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/5.jpg (http://s129.photobucket.com/user/yqtan1/media/5.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/3.jpg (http://s129.photobucket.com/user/yqtan1/media/3.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/2.jpg (http://s129.photobucket.com/user/yqtan1/media/2.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/1.jpg (http://s129.photobucket.com/user/yqtan1/media/1.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/9.jpg (http://s129.photobucket.com/user/yqtan1/media/9.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/8.jpg (http://s129.photobucket.com/user/yqtan1/media/8.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/7.jpg (http://s129.photobucket.com/user/yqtan1/media/7.jpg.html)
http://i129.photobucket.com/albums/p229/yqtan1/6.jpg (http://s129.photobucket.com/user/yqtan1/media/6.jpg.html)