Info needed for Gearbox Re-Build for DA9 TEG!!!!

[LO_N_SXC]

Hi guys
I have done a search on the forums but no luck :( All I need is Information on how to do a Re-build on my gearbox, coz it crunches when I shift from 3rd to 4th and it is very very bad if I shift around 3500 rpm's or above, I know it's the syncros that are giving up!!! but I need info on how to get the thing opened up and how to change the syncro's??? :confused:

Parts are no issue the issue is geting the thing fixed before it does more damage and goes Kaboom!!!! :eek:

Any info will be highly appreciated!

Thanks! :D

[mr crex]

dunno if these links will help but worth a shot.

I personally would recommend going to a mechanic for trans rebuild and not attempting yourself.

http://faq.ef-honda.com/index.php?sid=29337&aktion=artikel&rubrik=002&id=26&lang=en

http://faq.ef-honda.com/index.php?sid=29337&aktion=artikel&rubrik=002&id=29&lang=en

[LO_N_SXC]

Thanks Bro!!! :thumbsup: I had a look at the links and they give heaps of info, I dont think sending the gearbox to a mechanic would be needed due to one of my mates working at Honda and the other works wid cars from home every day (Nissan/Honda engine convertions and Turbo setups) and on top of that I used to be an apprentice mechanic, I just needed to know how/what it is that I need to look for so it can be replaced.

Once again Thanks for the help, Highly appreciated!!!! :D

[ECU-MAN]

I remember a few good threads here about this sort of thing, do a search on the whole forum as I cant remember what forum there under.

[Weq]

ive got a gearbox if u need 1. ;)