Will this t3 downpipe flange work with internal gated turbo?

[RandyRhydah]

http://i.ebayimg.com/03/!B9HPr+w!Wk~$(KGrHqUOKo4Ey+jC0PqmBM41rbV4Gg~~0_12. JPG


Ebay pic just for reference but will this type flange work with the internally gated turbos? i cant find any dump pipes that look like silvia ones with the duel pipes or one big enough to fit the internal gate? only this style..

just really frustrated as im new to turbos and there is way to many different styles lmao

[89lude]

that will not work with an internal gate turbo you need one with two holes big and small if you used that itll give you dramas what size turbo is it have you tried going to tripple nine they have most flanges in stock or go to extreme engineering at archerfield there he can cut you one up

[RandyRhydah]

yeah i had a feeling just wanted to confirm. im up in hervey bay so cant wonder down, are these the same 5 bolt pattern as the rb26dett turbos?

[Lukezen27]

you can drill-out a hole if you've already brought the flange :P

cheap and nasty style

[RandyRhydah]

nuh having already bought it just scratching my head..

[mugen_ctr]

if u cant find one, last option is to get one custom made for the turbo/dump pipe, dont go cutting that gasket, odds are it will leak over time, better off buying one thats made for it, do it once, do it right

Have u got the dump pipe? If u got it, than there should already be a gasket with it, it be kinda stupid if u got the dump pipe an no gasket with it

[89lude]

you can chop off the old dump to keep the flange and reuse it the flange

[hisoka]

just chop a hole if you already have it

rx7s s4 use that same one

but behind it, its blocked off aswell

so either you can block yours off behind with a plate. i dont reccomend, rather just cut the shit and use copper max and be done with it.

[RandyRhydah]

sorry for the late reply thanks for the info guys.. i do not have the dump pipe for it yet i have a gt2530 which uses a different flange for the dump and my tuner says its too small causing a flat spot when the wastegate is closed. so i got my hands on a cheapy godspeed gt3076 for a good price which has a bigger exhaust side and trying to cheaply see if that fixes my problem. then ofcause i will buy quality stuff but i dont want to spent 2k+ for the trial and then it doesnt fix my issues..

[hisoka]

godspeed 3076 ?

is that from america or someshit ?

[RandyRhydah]

yeah ebay special.. just needed a bigger turbo for cheap to see if my problem really is because the hotside was too small

[hisoka]

i suggest kinugawa turbo. 700 bucks, and it works the same as a garret if not better.

[Lukezen27]

i suggest kinugawa turbo. 700 bucks, and it works the same as a garret if not better.

I brought a brand new garret GT28071R off eBay $950 :)

[RandyRhydah]

yeah but the thing is that will be 700 - 950 wasted if it doesnt fix my problem im just going back to my old disco i picked this up for 400

[hisoka]

I brought a brand new garret GT28071R off eBay $950 :)

thats cheap as chips

what size rear housing boy.

[Lukezen27]

thats cheap as chips

what size rear housing boy.

0.86

Old setup that's sold now