EG B18c2 Idle Problem!

[MikeyG]

Hey fellas,

my eg has a b18c2 in it, today got a new battery put it in, car started but revs till redline and wont go down.

Ive tried this maybe 3-4 times, car has a b16a ecu with hondata s200 tuned for b18cR i/h/e.

Would anyone have any ideas what would be the issue? i cant check the codes as i dont have a normal b18c2 ecu

[smallsn]

did you adjust the dizzy?

[MikeyG]

highly doubt the dizzy would affect it

[MikeyG]

any1???

[EG5]

is your throttle cable stuck?

[MikeyG]

there is no throttle cable

[fatboyz39]

Vacuum leak

[MikeyG]

does any1 think it might be from the ecu? or even the tps

[MikeyG]

any1?

there is no throttle cable, the car starts REVS to redline and i have to shut it down..

if toda can maybe shed some light if the ecu might be doing this? b16a ecu with s200

[sxmachine]

If I was u get the standard ecu run it with that. Than take it to a tuner and give them ur s200 and they can tune it... But could be a vacuum leak some where

[MikeyG]

also forgot the advise that when i turn the car on.. not the engine but the power the speedo jumps to 120km and stays there..

any1 can lend me hand or advise me besides vaccum leaks?