View Full Version : B18C gearbox problem :(
lsvtec
30-11-2010, 05:58 PM
hey guys,
i was driving hone today and once i got to my drive way i tried to put my car into first but it woudnt go into gear. Pushed the car up the drive way then tried to put it into gear, it went into gear but it was very hard and it makes a funny noise, sort of like a grinding noise.
I havent driven after this so i cant say if its the clutch.
Can some one help me out here.
Thanks
lsvtec
30-11-2010, 06:23 PM
Anyone?? i need to urgently fix this problem
AE092
30-11-2010, 06:29 PM
Sounds like a clutch master cylinder issue possibly
lsvtec
30-11-2010, 06:30 PM
is this an easy fix or not?
jdmTYPE R
01-12-2010, 03:18 PM
check your clutch fluid level if it is normal.. it might be your clutch
lsvtec
01-12-2010, 10:24 PM
yeah its normal but i dont understand how my clutch could just go cos it was fine, it wasnt slipping or anything.
Limbo
02-12-2010, 12:13 PM
I had a similar problem last time. It turned out to be a cracked clutch plate. Sometimes can't tell until you take it out.
Have a mechanic look at it
lsvtec
02-12-2010, 04:25 PM
yeah the box is getting taken out on monday
89lude
03-12-2010, 01:15 PM
probably broken pressure plate.
lsvtec
03-12-2010, 02:20 PM
anywayz coz the box is comming off i might aswell change the clutch
najdi
06-12-2010, 06:43 PM
that happened to me except my clutch fluid drained somehow so i topped it up and bleed it and checked for leaks and it was all fine
mocchi
06-12-2010, 09:25 PM
its monday, so what happened?
lsvtec
07-12-2010, 06:02 PM
well the car went to shift on monday and the box should be out soon, i ordered an exedy sports organic clutch
VtiKid
13-12-2010, 12:19 PM
dude ive been dealing with my slave cylinder for like 5 months now i feel your pain, hopefully nothing major has happened and we hear news ur teccin again with a big =D on ur dial... (no pun intended).. hahahahaha
lsvtec
14-12-2010, 04:50 PM
lol just got the new clutch in and the car is all fixed now :D
ITEAZR
05-01-2011, 12:11 PM
did they tell u what the issue was?
Clutch master cylinder probably........ =P
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.