Difference in Timing Belt B16A, B16A1, B16A2, B16A3

[itg33k]

Hey Guys,

Not sure if this is the appropriate section to post this in.
I have done search but couldn't find anything to answer my question.

Is there any differences in the following in terms of timing belt for B16A, B16A1, B16A2, and B16A3?
I'm buying a timing belt and some places state its specifically for a B16A2 and B16A3.

I have an ODB1 B16A Jap Spec motor and doing full service ie. Belts, Water pump, tensioner and seals and what not.

Just want to confirm before I purchase the belt, water pump and tensioner.

I would assume they are all the same correct? Unless there is extra teeth on the pulleys and so forth.

Thanks Heaps,
Mike

[Bludger]

no difference.

different between b16 and b18

[Limbo]

pretty sure the b18 has 2 extra teeth than the b16,
The b16 are all the same

[Tai]

no difference.

different between b16 and b18


B16A timing belt is different to B18C/B16B

B18C is slightly longer.


http://www.tntperformance.co.nz/products/browse/225

[itg33k]

In terms of water pump it's all the same aswell ?

Thanks for the all the replies guys.

Cheers,
Mike

[Bludger]

B16A timing belt is different to B18C/B16B

B18C is slightly longer.


http://www.tntperformance.co.nz/products/browse/225

aaronng edit: Removed personal attack





Hey Guys,

Not sure if this is the appropriate section to post this in.
I have done search but couldn't find anything to answer my question.

Is there any differences in the following in terms of timing belt for B16A, B16A1, B16A2, and B16A3?NO
I'm buying a timing belt and some places state its specifically for a B16A2 and B16A3.

I have an ODB1 B16A Jap Spec motor and doing full service ie. Belts, Water pump, tensioner and seals and what not.

Just want to confirm before I purchase the belt, water pump and tensioner.

I would assume they are all the same correct? Unless there is extra teeth on the pulleys and so forth.

Thanks Heaps,
MikeDifferent between b16 and b18

[Bludger]

no, not at you.

[Chr1s]

Any B16A timing belt will work, as far as the water pump goes, all VTEC water pumps are 21Teeth so you have no other issues

[TODA AU]

B16A (all models) timing belt size is 124RU26 (124 teeth - 26mm wide) - OEM P/N: 06141-PR3-305
B16B/B18C (all models) timing belt size is 126RU26 (126 teeth - 26mm wide) - OEM P/N: 06141-P72-305

[itg33k]

Thanks for all the info guys, much appreciated.

Ordered the timing belt, tensioner and water pump :D