View Full Version : Will eg6 coilovers fit an eg4?
Blackteg
01-12-2010, 06:14 PM
Will eg6 coilovers fit an eg4?
sorry if it is a noob question cant seem to find it anywhere
bennjamin
01-12-2010, 06:20 PM
fronts yes no issue
rears NO
Rears will require DC2R or EG6 rear control arms to fit them in.
tiksie
01-12-2010, 07:49 PM
Grab some Type R rear LCA's or EG6 Rear LCA's which are preety much the same thing and then you can fit the rear :) It's about $150 for the pair.
dougie_504
01-12-2010, 08:18 PM
As above. I bought some DC2R lower control arms for my EH9 so that I can run EG6 Bilstein coilovers. Have previously paid $150 for each of my last two sets.
DownunderSiR
02-12-2010, 03:58 AM
Do your coilovers have a fork or eyelet attachment at the bottom of the shock? Then it depends on the type of lower control arm (LCA) you have. Aussie delivered cars will have a fork attachment while JDM EG6 / ITR should have an eyelet. Fronts will be the same regardless.
Blackteg
02-12-2010, 08:35 PM
thanks guys.. ordered some eg6 tein coilovers last night for the eg4 just gotta find some eg6/dc2r LCA now
newpaddy3
02-12-2010, 08:49 PM
I have DC2R LCA if you're interested.
I can do the install if you're in Sydney...
dougie_504
03-12-2010, 08:14 PM
I'll install if you're in Melbourne for free
mocchi
03-12-2010, 08:33 PM
I'll install if you're in Melbourne for free
wow youre such a nice guy. haha
dougie_504
03-12-2010, 08:51 PM
Haha no I just enjoy helping people and working on cars. If I wasn't a nurse I'd be a mechanic or something I reckon :P
Only takes like 2-3 hours depending on what equipment you have, if something goes wrong etc...
Blackteg
04-12-2010, 11:29 AM
i'm located in brissy thanks for all the offers guys..
i'm a spray painter so i know my way around cars pretty well, just dont know model specific items
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.