EK4 > EM1 axel back cannon?

[duckey]

hey guys will an ek4 axel back fit onto an em1?

cheers

[Riced_Civic]

should be straight swap, only thing is that it might sit in the bumper a little cos its from hatch to coupe

[Tai]

It will bolt on but it will be way too short, prob a good 10-15cms.

So you will need to extend some piping to make it work.

If you left it on it will prob squish into your rear bumper adn burn it.

[mugen_ctr]

if u ever seen a em1 axle, u will see it extends much further compared to ek4, will look outta place.... i know cause i tried this on my car lol

Why not just get something thats prefab already for the car?

[duckey]

thanks guys. how about eg cannons? same deal with ek4's?

been looking for one for a while...no one seems to be selling em :(

[DC5.Raven]

Try cannons for EK Sedans? They'd be a straight fit.

[Tai]

thanks guys. how about eg cannons? same deal with ek4's?

been looking for one for a while...no one seems to be selling em :(

It won't fit, still.

Only EK sedan or EM/EJ coupe will fit your car directly.

Anything else will need to be modified to fit.

[raffyboy]

It won't fit, still.

Only EK sedan or EM/EJ coupe will fit your car directly.

Anything else will need to be modified to fit.

Agree with TAI - also if you are going to modify make sure to tell whoever going to work on it if you want to fit them with flanges or straight weld and if you want to use flexis

I got my exhaust done with no flanges straight weld as I track my car and a lil of flex cause car is sitting low