PDA

View Full Version : eg breeze turning over but not starting



thj822
13-12-2010, 11:41 PM
thursday it died at the traffic light, took a good 2 mins revving the crap out of it to start it. had to keep the revs up to keep it running. it i dont rev it it drops and dies out. like misfiring. prior 2 weeks to this i did notice when i start the car the revs drop up and down. after 5mins normal. also i found oil in the spark plugs. except for cylinder 4.

so i have replaced spark plugs and leads but still no change. redid the gasket and spark plug seals. it will turn over but not start. help???

much appreciated

dc2r-0636
14-12-2010, 01:12 PM
first thought was spark plugs and leads but they have been changed.. might be your ICM..

Lukey
14-12-2010, 06:00 PM
have you got spark?

thj822
18-12-2010, 09:35 PM
check today has spark
i got it to start today. i got the firing order wrong when i was changing to new spark plug leads
1-2-4-3 its suppose to be 1-3-4-2
but still running tiny bit rough
what can i do to fine tune it?

dc2r-0636
19-12-2010, 03:35 PM
check today has spark
i got it to start today. i got the firing order wrong when i was changing to new spark plug leads
1-2-4-3 its suppose to be 1-3-4-2
but still running tiny bit rough
what can i do to fine tune it?

take your negative terminal out from your battery over night. then put it back on and start the car and let it idle for 10mins.. do not rev the car or do anything for the those 10mins.. while the ecu adapts