tapping water an oil lines? d-series

[mugen_ctr]

quick one fellas, anyone know where to tap the water lines, an oil lines

I know of one place with oil, using a oil sandwhich plate, u can tap it there, an have a direct drain line into the sump

But is there alternatives?

And more so, water lines? feed an return water lines

thanks

[honda_zivic]

http://www.d-series.org/forums/forced-induction/126928-how-hook-up-turbo-coolant-lines.html

[honda_zivic]

for oil feed just buy a sandwich adapter or buy those adapter 1/8 size that fits to ur block.
sandwich adapter u have 3 ports, so u can run a oil pressure gauge, oil feed to turbo, and wateva u want.

these kunts sell all da sht u need http://www.stealthmodeperformance.com/

also depending on ur turbo as well, in my case my turbo was a deadset prick to find correct fittings to fit them braided lines.

water line can flow horizontal way. so u dont have to X angle position turbo.

also doesnt matter which 1 is feed or drain for water.

[mugen_ctr]

cheers man :D

makes it that much easier now lol

[Lukezen27]

just use the lines off the TB