PDA

View Full Version : B18B into 1999 EK1 D16Y civic gli



jemzcivjet
02-01-2011, 02:47 PM
Hey guys,

I am new to civics and am wondering if a B18B or B16B motor is an easy transplant into a 1999 EK1 civic gli??? and do i need the B motors trans as well or will my stock trans bolt up and work out fine? (manual).??

Thanks.

Bludger
02-01-2011, 03:19 PM
http://www.ozhonda.com/forum/showthread.php?41413-New-to-modifying-your-car-see-here

http://www.ozhonda.com/forum/showthread.php?47020-Motor-Change-guide-for-EG-*-B-D-H-K-SERIES-!!!!

http://www.ozhonda.com/forum/showthread.php?30977-Civic-crx-Frequently-Asked-Questions-and-Useful-Threads

http://www.ozhonda.com/forum/showthread.php?5918-HEY-YOU-!-BEFORE-YOU-TYPE....SEARCH-!-!-!

I found some information that I think relates to your question.

They were all stickied

was very easy to find.

simmy
02-01-2011, 05:09 PM
might want to start doing a little research mate,,
questions and answers are all over the interwebz..

you will need a b16a or d16y8 engine loom for it to work
you will also need b16a rear engine mount and timing belt side mount..

you will need a b series transmission for it to work as well

unless its an auto , you will have to do a manual conversion first before anything else...

hope that helps.


Hey guys,

I am new to civics and am wondering if a B18B or B16B motor is an easy transplant into a 1999 EK1 civic gli??? and do i need the B motors trans as well or will my stock trans bolt up and work out fine? (manual).??

Thanks.

jemzcivjet
02-01-2011, 05:46 PM
Thanks guys big help :)

dc2r-0636
06-01-2011, 10:23 PM
p.s b18b isnt vtec where as b16b (ek9) is, the b18c tho is vtec b(b18cR/b18c7 = jdm and audm type r ) (b18c2 = audm vtir)

bennjamin
07-01-2011, 08:10 AM
b18b is still a decent motor. Make sure its from a later GSi - 96-00 model. It needs to be a OBD2 motor to match emissions from your chassis year.
Then just get all B series running gear from a EK4 or EM1 and you are fine.
(drive shafts , rear engine bracket, gearbox bracket shift linkage ECU wiring etc )

integragsi96
07-01-2011, 09:04 AM
my b18b with only 85XXX runs great...reaches full torque before the b18c2 and the b18cr. but once they hit vtec say goodbye lol
nether the less it is still a good engine and from what ive read is good to turbo

jemzcivjet
11-01-2011, 07:12 PM
Thanks all been a big help... time to start saving haha