PDA

View Full Version : How to remove the standard head unit on 2009 honda odyssey RB3 std



tomfeng1985
04-01-2011, 01:12 PM
does anyone know or did it? please share with me,having truoble with it, don't know where to start with:o thanks guys!

Philip Lee
04-01-2011, 02:45 PM
are you experienced with installing headunit? if not probably get a pro to do it.

anyway i got this off Alpine Japan site, since i don't have a RB3 i can't confirm if it applies to our car so use it as a guide only.

17414

tomfeng1985
04-01-2011, 02:51 PM
:thumbsup:

Philip Lee
04-01-2011, 03:08 PM
Please take some pic and make a DIY guide.

thanks

Atjo
05-01-2011, 10:34 AM
Should be similar as removing headunit on RB1 if using the JDM double-din console.

tomfeng1985
08-02-2011, 05:37 PM
finally got the headunit, but does anyone know where the 12V signal wire for the reverse light in car? close to the dash area? cos i'm getting the wireless reverse cam for it, but it needs a signal to switch the headunit. thanks guys~

evolution
08-02-2011, 09:08 PM
I believe my mechanic grabed mine from the gear shift lever

AusAccord
09-02-2011, 07:46 AM
^^ yap, otherwise has to hard-wire all the way from reverse light

Atjo
09-02-2011, 01:05 PM
Mine was from reverse light as it's not wireless camera.

AusAccord
09-02-2011, 01:23 PM
mine was from reverse light as well

evolution
09-02-2011, 02:31 PM
I'm getting confused here. Is the wire for activating the HU or the camera itself? My HU is activated by the gear lever while the camera is activated by the reverse light. Mine is also not wireless, so I have a video cable running from the back to the HU to provide the picture.

AusAccord
09-02-2011, 02:50 PM
ah you are correct. as far as i know on mine, power of camera from reverse light and camera signal (1 RCA wire) to HU. HU detected there is a signal from camera then turns to default AV mode for reverse camera. yeah, i'm pretty sure thats how it works.

tomfeng1985
09-02-2011, 10:39 PM
I'll try to find it around the shifter.~~:D

Atjo
10-02-2011, 10:42 AM
All my wire is connected to reverse light. There's 1 wire on the head unit that will trigger the video when the reverse gear is engaged. So i connect that wire to the same wire that connects to reverse light.

tomfeng1985
12-02-2011, 06:40 PM
I've looked at the wires but didn't find it. let me know bro, thanks very much!:D

Atjo
15-02-2011, 09:34 AM
Which wire are you talking about? The wire that i was talking about is the wire on the aftermarket headunit. It should have the label saying reverse camera.

tomfeng1985
15-02-2011, 12:50 PM
Thanks for the infos everyone:D