Door lengths of ef hatch/crx/sedan

[trism]

Can anyone give me measurements of the doors on teh EFs?

Length of the door along the lower edge, length of the bottom of the window opening, and height at the front and the rear

Thanks

[markismaximus]

I could go measure my door but its not an EF...

[chargeR]

I guess he will just have to wait for some mad tyte JDM car owning people to see this thread then.

[trism]

http://knowyourmeme.com/i/27568/original/21187-101796-facepalm6jpg-468x.jpg?1258761334

Better go delete most of the pics in the EF picture thread then, ay?

[markismaximus]

better get to it...

[markismaximus]

http://i225.photobucket.com/albums/dd121/mx83cressida/Honda%20FSM%20Pages/door.jpg

[trism]

fuuuuuuuuuuuuuuuuuuuuu.

Tried to Rep, wont let me. I must spread some around lol

thanks man, youre awesome win

many internets to you

[dougie_504]

Do you want me to do this to my EF8?

[~Sp33~]

I can do this for my sedan if you still need it.

[trism]

dougie and sp33

if you guys can do it, thatd be super ****ing awesome!!

[markismaximus]

what are you actually looking at doing? some sought of hydrid door?!!! using interior door components from a sedan in a hatch etc?

[~Sp33~]

Shall do when i get a chance over the next couple'o days.

[trism]

what are you actually looking at doing? some sought of hydrid door?!!! using interior door components from a sedan in a hatch etc?

yeah, something along those lines, been comparing the interiors/dashes between them all.

and a few other things ive got in mind

[mocchi]

fuuuuuuuuuuuuuuuuuuuuu.

Tried to Rep, wont let me. I must spread some around lol

thanks man, youre awesome win

many internets to you

ill do it for you, although cant do it for mark hehe.
thats some mad effort mark. good job.

[markismaximus]

thanks for trying mocchi, it would appear if you've ever given me rep before you can't give anymore


yeah, something along those lines, been comparing the interiors/dashes between them all.

and a few other things ive got in mind

how does the unserdash equipment compare? as in A/C ducting, heater console, blower fan etc? I'd be interested to see pics if you go ahead with it

[Renaissance_x]

I will go measure the doors on my ed crx if I find some measuring tape.

[trism]

thanks for trying mocchi, it would appear if you've ever given me rep before you can't give anymore



how does the unserdash equipment compare? as in A/C ducting, heater console, blower fan etc? I'd be interested to see pics if you go ahead with it


From what ive been able to find from digging around the interwebs, its basically just brackets that will need to be modded, or swapped over.

all the a/c ducting, blower fan, HVAC controls seem to line up and bolt straight back up. Although some people say there is problems with the plastic trim around the steering column, but others say its fine, so ive got no idea.

[dougie_504]

Just been on the gold coast for a week. Will do it later this week, sorry for the delay.

[B16]

Dont mean to steal your thunder Andy )would be good if you checked yours as it's hard to measure the curved surfaces!, but I just measured up mine:

http://i235.photobucket.com/albums/ee149/angelfire4130/Honda/Picture.jpg

The length of the bottom window section between the mirror and the end of the door (same location as mark measured) is 980mm

HTH

[Renaissance_x]

Measuring my doors now.

[dougie_504]

Nice one Matt thanks haha. Haven't even taken the cover off mine for over a week now. Better do so this arvo or else the battery will go flat. I still have a JDM battery from pre-importation :D

[trism]

thanks guise!!

so it looks like dimensions wise the crx is pretty close to the civic, just has the funky curve back to follow the roofline.

just need a sedan now!!

[~Sp33~]

Just tring to find time. Hopefully get around to it this arv

[~Sp33~]

Here you go, any other measurements, LMK.

http://img832.imageshack.us/img832/4853/img1906v.jpg

[dougie_504]

So now you just need EF3 and EF9?

[trism]

epic win guy approves of this thread.

Dougie, id hope that theyd be the same as the other models..

[trism]

hmm. so it looks like. front doors of the sedan are close enuogh to 20cm shorter than hatch/crx.

but the other dimensions are all whack.

overall height of the doors is the same at about 1050mm
but compare the height of the metal and glass on either,

glass height is 460 to 430, sedan with more

and the metal 590 to 620, sedan with less.

http://img832.imageshack.us/img832/4853/img1906v.jpg
http://i225.photobucket.com/albums/dd121/mx83cressida/Honda%20FSM%20Pages/door.jpg


so this makes my life more difficult....

[~Sp33~]

Ef3 (hatch not sedan) and Ef9 have the same doors.

the tallest part of the sedan is the rear of the roof, where on the hatch it tapers back from the a pillar

[trism]

is the angle of the A pillar the same between hatch and sedan?

[~Sp33~]

Nope.