PDA

View Full Version : CL9 - Bump



schonda
14-01-2011, 04:02 PM
At Parra I hit those short yellow poles whilst reversing breaking the exterior of my red break light on the far right and the top metal part just beside the boot opening. Any ideas how much this is gonna cost to fix or even how much those exterior glass/plastic red light covers cost?

Thanks.

integral90
15-01-2011, 04:09 PM
If you've done rear quarter panel damage then it's gonna be costly

schonda
15-01-2011, 04:34 PM
If you've done rear quarter panel damage then it's gonna be costly

Sorry don't know what you mean by quater pannel but it hasn't touched anything on the boot only on the far right drivers side.

Here is an image http://img547.imageshack.us/img547/2905/hit.jpg (http://img547.imageshack.us/i/hit.jpg/)

schonda
15-01-2011, 04:36 PM
I dont know how it hit the top circle and the tail light without leaving a bump on the plastic rear bumper, it has left marks but no bump, must have popped out?

I am in sydney if anyone knows of any smash repairs?

euromandeluxe
15-01-2011, 04:37 PM
that top dinted panel is the quarter panel.

schonda
15-01-2011, 04:40 PM
I see, I am guessing that is expensive cause it's not plastic right? I can live with it I guess, but definately can't live with the cracked tail light cover so I wanna replace it.

j.meng87
15-01-2011, 04:40 PM
Cheap way of fixing would be to use body filler. Not the best but cheapest option than a rear 1/4 pannel replacement