View Full Version : 99 ek civic interior genuine recaro seats + handbrake centerconsole with armrest
blastnpast
15-01-2011, 06:53 AM
I have an issue, seeming I want to get an armrest ek4 styles... However the recaro seats were made to retract but the retraction is actually on the inside of the seat hence the reason a problem
May arise when trying to move the seats back rest angle
Has anyone got some info and if this has been done before? Did it cause you any problems :)
http://184.72.239.143/mu/af201614-b70d-1d63.jpg
Thanks for the help!
geeang
15-01-2011, 04:27 PM
Same goes with putting SR3 Recaros from a DC2R into a DC2 VTIR - I just switched the driver/passenger seats around so the adjustment knob is on the outside facing the doors.
It's a bit of a squeeze to adjust but it's better than not being able to adjust at all with the armrest in the way.
tiah313
16-01-2011, 12:25 AM
thought the adjustment knob is facing the door stock, coz two of my mates dc5r is lyk that but then my dc2r has it facing handbrake
blastnpast
16-01-2011, 05:51 AM
Hm my dc2r seats are adjusting inwards lol don't really want to change the way it is can't be bothered .)
Bludger
16-01-2011, 09:41 PM
Same goes with putting SR3 Recaros from a DC2R into a DC2 VTIR - I just switched the driver/passenger seats around so the adjustment knob is on the outside facing the doors.
It's a bit of a squeeze to adjust but it's better than not being able to adjust at all with the armrest in the way.Hmm, guess I'll have to swap the seats around when I put the armrest in........
This is a definite have to?
geeang
16-01-2011, 09:44 PM
Hmm, guess I'll have to swap the seats around when I put the armrest in........
This is a definite have to?
If you're putting in an armrest then you'll have to if you want to adjust your seats at all.
blastnpast
17-01-2011, 08:29 AM
Lol it seems like alot of work just to fit armrests anyways I don't need to adjust them so when I find the console I'm gonna hit it up :D
Perry
17-01-2011, 08:47 AM
Blastnpast - Just swap the 2 seats around.
IEVAQ8
17-01-2011, 09:43 AM
in my itr i had installed a vtir arm rest as u have pictured above, and it was still okay to adjust leaving the adjuster inwards.....
all dc2r have the adjuster facing inwards from factory.....
blastnpast
17-01-2011, 09:45 AM
Thanks for the feedback ill prob end up leaving the adjusters as they are :) I don't need to adjust the seat anyways they are perfect as they are :D armrest FTW
blastnpast
18-02-2011, 05:31 AM
Hey Mods,
Please delete this as the info is not needed.
Thanks!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.