ek power window conversion

[dusAn]

hey guys im planning to do a power window conversion just wondering what parts i need to take out of the car ive found at the wrecker. eg door trims, or any plugs i need

thanks

Dusan

[da12nv]

you cant just use eg bits for an ek they wont fit. If it is another ek you will need both pwr window motors and regs from inside the doors both door trims the switches the door wiring loom and also the main wiring loom which runs from your fuse box to your fuel pump then across over to the other door and you will also need the main square fuse

[seihoa]

Eg = example

LOL

Stuff the loom to the fuse box just grab power from any acc power supply. =D

If you wana be cheap just buy those power window kits and install them and if u wana be more neat just buy the door trim and switch and swap them over.

Ghetto style !

[da12nv]

haha must have been half asleep or not with it that day when i read it, it all depends on how good you want the job mate,

[JDM-derek]

no worth doing, i was gonna do it aswell.

just stick wit arm power :)