Return of D King [PICS]

[Weq]

http://members.optusnet.com.au/loxy/car/turbo/install/head/built/ran1.jpg
http://members.optusnet.com.au/loxy/car/turbo/install/head/built/port1.jpg

http://members.optusnet.com.au/loxy/car/turbo/install/head/built/port2.jpg
http://members.optusnet.com.au/loxy/car/turbo/install/head/built/port3.jpg

http://members.optusnet.com.au/loxy/car/turbo/install/head/built/ran2.jpg
http://members.optusnet.com.au/loxy/car/turbo/install/head/built/head1.jpg

http://members.optusnet.com.au/loxy/car/turbo/install/head/built/head2.jpg
http://members.optusnet.com.au/loxy/car/turbo/install/head/built/head3.jpg

http://members.optusnet.com.au/loxy/car/turbo/install/head/built/head4.jpg

http://users.bigpond.net.au/weq/ostrich.jpg

http://members.optusnet.com.au/loxy/car/turbo/install/head/built/ecu.jpg



http://members.optusnet.com.au/loxy/car/turbo/install/head/built/mount.jpg
http://members.optusnet.com.au/loxy/car/turbo/install/head/built/end.jpg

Mods:
Crower Valve springs (good for 9k+)
Crower Titanium Retainers
Comp/Zex Stage2 Cam #93500
Port and Polished head
Intake and Exhaust manifolds ported and matched
All gaskets port matched
3-Angle Valve job
Resurfaced Head with O-rings
Full reconditioned, new seals throughout. Acid dipped.
ARP Headstuds
Prothane Urathan Motor mount inserts
Chipped ECU

Notes:
* The rear tranny mount sucks. Never accidently put it in backwards, because it wont support anything ;)
* Win made the trip over and got down and dirty with me and rufes1 and daivid. Ozhonda head installed.
* The motor mount inserts have made the mounts hella study now. Almost zero engine movement, but its all been transfered the the body. Defainbtly a mod for the hardcore racer, not for the show ponys. I had trouble with the upper engine mount, as the inserts needed to be pressed out, and my replacements pressed in. i decided not to put them in, and i think im glad, the vibrations would of been crazy. The upside is though, i dont rekon axel tramp will be a problem, and i definatly get a more responsive feel from the engine/cornering due to no movement.
* She needs a tune. My fuel maps are way out now, im bogging down low but pulling like a mofo uptop. Mostly due to porting.
* Stay tuned for dyno and 1/4 mile times ;)

[Rufes1]

nice pics,

happy happy joy joy

[CHU85]

very nice and well done. cant wait for the 1/4 mile times!

[Lukezen27]

Wicked Weq

Gives me hope for my little D16Y1 :D

How much did that all cost?

I was looking at Crower cams and springs till I found out my rings may be gone F**K

There gose $1000 to $1500 that could have been put to funner use :rolleyes:

[wynode]

So she started up and ran fine?

Can't wait to see the results after a nice tune! :)

[MKI4EVA]

who did the porting weq? DIY?

[Weq]

na head was worked by harris engines ;) they were a few days overdue, but they did well in the end. i forgot to get pictures of the manifolds, they look good...

the crower springs&rets owe me 280US.

after a few hiccups with the engine mount and the ecu, the car started and is running as expected ;)

[LAGOOT]

nice.. very nice :thumbsup:
post up figures when you get them.

[**Ghost**]

weq ar eu a mechanic or are u just handy with tools?

[wynode]

weq ar eu a mechanic or are u just handy with tools?
Yeah......he's a handy tool ;)

[Nuttz]

go the mighty D!!!

[Sp3rMz]

Far out cant wait to see figures when u get them. :thumbsup: :thumbsup: :thumbsup:

[Weq]

thanks for the support guys. If anyone has a chipped ecu (uberdata or whatever) and can help out with a few things, pm me ;)

ghost: im no mechanic, just a poor man trying to create something.