PDA

View Full Version : Where is the OBD2 Data Link Connector DLC?


stocky
22-01-2011, 05:56 PM
On an AP1 2000 model S2000, where is the OBD2 DLC port? This is for an Australian model btw, not overseas.

Cheers
ncmx5
22-01-2011, 10:23 PM
We don't have OBD2
stocky
23-01-2011, 12:51 AM
Yep just realised this, no OBD2 port, but the DLC is the same as the obd1 and early obd2 cars, its located under the driver's side dash, two pin short
tonyh999
24-01-2011, 01:01 PM
Does anyone know whether Greddy Informeter Touch works on our AP1 S2k ? (I saw someone has it on his AP2 S2K in HK)
VeYzZii
26-01-2011, 10:20 PM
DLC ıs useless to us.. unless bıg $$$
AusS2000
27-01-2011, 07:54 AM
Which begs the question, as US AP1s have an OBDII connector what is the difference between the US and Au S2000 diagnostic connectors?
tonyh999
08-06-2011, 08:52 PM
Does the AUDM AP2 have OBD2 connector?
AusS2000
08-06-2011, 09:27 PM
There are no AUDM AP2s. But later model AP1s have ODBII.
tonyh999
08-06-2011, 09:42 PM
oh thanks!
Mine is MY00 and i believe it only has a 3-PIN DLC connector. I've been asking around to see if anyone successfully hooked up their Greddy Informeter Touch (or something similar) using a 3-PIN DLC to 16-PIN OBD2 adapter. I'm so anxious to get it to work with my S2K.. :(
ncmx5
08-06-2011, 10:14 PM
let us know if you get it working. i wanted one of those or a scangauge... but yeah, no OBDII
VeYzZii
08-06-2011, 11:16 PM
Scanguage doesnt work. From my personal experience. (Any scanguage)
tonyh999
09-06-2011, 09:16 AM
Thanks VeYzZii. What about Greddy Informeter Touch? It only takes OBD2. Do you think it will work using a 3-PIN DLC to 16-PIN OBD2 adapter?

More info: http://greddy.net.au/products/display/?Category=electronics&SubCategory=56

thanks in advance!
VeYzZii
09-06-2011, 03:11 PM
I doubt the Greddy will work either. Coming from all the problems i had with the scanguage, finding the adapter, buying the product and at the end being dissapointed.. I dont know if it will have the same problem, best off talking to ECU-MAN about these things.
AusS2000
09-06-2011, 03:16 PM
I doubt it will work either. ODBII is a superset of ODBI (as the name suggests). These monitor gauges take advantage of the features of ODBII that weren't available in ODBI.
VeYzZii
09-06-2011, 05:59 PM
I doubt it will work either. ODBII is a superset of ODBI (as the name suggests). These monitor gauges take advantage of the features of ODBII that weren't available in ODBI.

Yea thats right, because on the Scanguage site it runs on Protocols from OBDII. And so it makes it impossible for the AUS S to be compatible.. As far as i know.