*** Official - What Did You Do To Your EG Civic Today? ***

[zhong]

But they look good! ):

[na-118]

if you want for looks then buy shifter extension from circuit hero or something,
if function and looks fastline

[na-118]

http://img528.imageshack.us/img528/3634/p5270055large.jpg (http://imageshack.us/photo/my-images/528/p5270055large.jpg/)

shock tower wire tuck

[Alexx]

Nice work!

[na-118]

thanks, does anyone know what an size is the works engineering fuel rail? want to get a inline filtersetup happening for tuck setup

[ericl33]

how much do you charge for wire tuck service na-118?

[na-118]

depend do you spit or swallow?

[mocchi]

depend do you spit or swallow?

which one is better?

http://www.ozhonda.com/forum/customavatars/avatar11984_24.gif

OT: made grounding wire
http://i516.photobucket.com/albums/u323/breadbaconncheese/K%20Swap/P1030996.jpg

[jeremydawg]

niice

looks gootenberg

[na-118]

http://img824.imageshack.us/img824/1290/p6060068.jpg (http://imageshack.us/photo/my-images/824/p6060068.jpg/)

[EKVTIR-T]

^ delicious

[charliebrown]

^joeybruh spec

[Super-DA9]

just picked up this baby the other day for my new daily!

first thing and only thing I've done with it is buffed all the paintwork because the panel shop it lived at never finished the job lol.

http://i582.photobucket.com/albums/ss263/soulbinder/2012-06-07114911.jpg

http://i582.photobucket.com/albums/ss263/soulbinder/2012-06-07114959.jpg

need to get some amber corners asap

[cnez]

Super da9 pm sent

[Super-DA9]

received ;)

[cnez]

Touched up paint all the stone chips on the front bumper. They were looking horrible.

[Egxris]

^^^ Want shifter extension. Where?


shifter extensions are shit, invest in fastline shifter

Mine is a fastline shifter....

[Super-DA9]

changed engine oil, filter, coolant and thermostat today.

hopefully that should fix the issue with not staying at running temp.

[Tom eg5]

Fresh finish on my TEs!


http://i814.photobucket.com/albums/zz68/Quiksilverpro_asd_1/IMG_1147.jpg

[CivicEGSI]

Lookin sik m8

[charliebrown]

sold my black housings and amber corners. startin to feel the OEM look but looks so plain. what you reckon look better?

http://desmond.imageshack.us/Himg593/scaled.php?server=593&filename=20120608112419.jpg&res=landing

http://desmond.imageshack.us/Himg21/scaled.php?server=21&filename=20120608123853.jpg&res=landing

[mocchi]

oem.

its tighter thats why. i know everyone likes it tight.

[Vvvtec]

just picked up this baby the other day for my new daily!

first thing and only thing I've done with it is buffed all the paintwork because the panel shop it lived at never finished the job lol.

http://i582.photobucket.com/albums/ss263/soulbinder/2012-06-07114911.jpg

http://i582.photobucket.com/albums/ss263/soulbinder/2012-06-07114959.jpg

need to get some amber corners asap

!! how much did you pick that up for?

kswap imminent lol

[ericl33]

!! how much did you pick that up for?

kswap imminent lol
inb4workondailyinsteadofintegra.

[white_ep3_civic]

sold my black housings and amber corners. startin to feel the OEM look but looks so plain. what you reckon look better?

http://desmond.imageshack.us/Himg593/scaled.php?server=593&filename=20120608112419.jpg&res=landing

http://desmond.imageshack.us/Himg21/scaled.php?server=21&filename=20120608123853.jpg&res=landing

I reckon keep the black housing and ambers

[CivicEGSI]

oem.

its tighter thats why. i know everyone likes it tight.

http://www.ozhonda.com/forum/customavatars/avatar11984_24.gif

[Super-DA9]

!! how much did you pick that up for?

kswap imminent lol

$2500 with rego till feb 2013. really immaculate paint for 1994! just needed a bit of a buff with the machine and some light compound to really bring it out. and no kswaps lol. D15B POWA 4 LYF Y0!


inb4workondailyinsteadofintegra.

I don't even.

[myztery]

Installed a short shifter with a double shifter extender,

Love love love it :)

[eg4boy]

trying super hard to swap over our d15b7 to d16y4, but having issues with wiring..

[Drifter995]

sold my black housings and amber corners. startin to feel the OEM look but looks so plain. what you reckon look better?

http://desmond.imageshack.us/Himg593/scaled.php?server=593&filename=20120608112419.jpg&res=landing

http://desmond.imageshack.us/Himg21/scaled.php?server=21&filename=20120608123853.jpg&res=landing

I like it better with clear corners and normal housings. I just prefer clear corners :D

[EKVTIR-T]

sold my black housings and amber corners. startin to feel the OEM look but looks so plain. what you reckon look better?

http://desmond.imageshack.us/Himg593/scaled.php?server=593&filename=20120608112419.jpg&res=landing

http://desmond.imageshack.us/Himg21/scaled.php?server=21&filename=20120608123853.jpg&res=landing
You can get these called "angel eyes" like bmw uses,adds a very upmarket look for EG

http://www.marsperformance.com/mars/attachments/image/HEADLIGHT/HONDA/CIVIC-EG-AH-C-S.jpg

[charliebrown]

You can get these called "angel eyes" like bmw uses,adds a very upmarket look for EG

http://www.marsperformance.com/mars/attachments/image/HEADLIGHT/HONDA/CIVIC-EG-AH-C-S.jpg

none of that pls, keepin it viet over here mate

[EKVTIR-T]

none of that pls, keepin it viet over here mate
What do you mean? I saw majority of guys who used them is vietnamese

[charliebrown]

What do you mean? I saw majority of guys who used them is vietnamese

baller spec vietnamese drive 320i not bmw/jdmyard/ebay styled EG

[ericl33]

What do you mean? I saw majority of guys who used them is vietnamese
lmfaooo

[myztery]

if you want for looks then buy shifter extension from circuit hero or something,
if function and looks fastline

Reason why I went cheap is cos I didn't want to modify a fast line shifter lolz,
Creating a template to get 50-60% shorter shift while having it as close as possible to steering with less movement

[dorikin]

shaved and wrinkled

http://img207.imageshack.us/img207/8575/img2752z.jpg

[ericl33]

niceee....

looks clean.

[Super-DA9]

changed the front brake discs and pads. I really should bleed the brakes this weekend too as the fluid is quite yuck..

[MIKO_OL]

shaved and wrinkled

http://img207.imageshack.us/img207/8575/img2752z.jpg

I like the wrinkle effect gives it a good oem look and not neccessarily that brand new look. probs advised you cover all holes before you sprayed them. That one on the middle bottom looks like it had a few coats ahha

[dorikin]

that one meant to be sprayed :)

http://farm4.static.flickr.com/3584/3517787089_01d23676eb.jpg

[cuppa]

sold my black housings and amber corners. startin to feel the OEM look but looks so plain. what you reckon look better?

http://desmond.imageshack.us/Himg593/scaled.php?server=593&filename=20120608112419.jpg&res=landing

http://desmond.imageshack.us/Himg21/scaled.php?server=21&filename=20120608123853.jpg&res=landing

Converted me, swapped mine back to oem.

[Super-DA9]

installed the new head unit and climate control.

f**k the climate control unit was a bitch, my hands got so cut up by the metal surround inside the dash..

[charliebrown]

installed the new head unit and climate control.

f**k the climate control unit was a bitch, my hands got so cut up by the metal surround inside the dash..

hahahahahah yeah dat shit fks you up, went through it all just to change a blown climate control bulb lol

[Super-DA9]

hahahahahah yeah dat shit fks you up, went through it all just to change a blown climate control bulb lol

oh man, and after all that, I find that on this unit sometimes i have to give the unit a knock to get one of the lights to come on... -_-

at least i can turn the heating on properly now lol.

[ericl33]

eat cement guise, should enjoy it.

[Rayseuro04]

Got a few things done LOL:
Got the bodywork done ready for paint, had it painted today by mate JJ at Xcustoms all ready for the showcase meet on saturday:
http://i1260.photobucket.com/albums/ii580/rays2701/047.jpg


New sticker representing for my boy James ISN IND:
http://i1260.photobucket.com/albums/ii580/rays2701/030.jpg
Also installed the following parts:
- Shifter extention
- Nardi deep corn
- Double din center console
- Full Honda hood bra
Got a few more parts to go in before the meet:
- BWR subframe brace
- BWR LCA's
- BWR Rear tow hook
- DENJI projector headlights

Will post pics when its all done ;)

[Egxris]

Bought myself a new year present. Carbon bonnet. pics tomorrow :D

[Auzziebiker]

just picked up this baby the other day for my new daily!

first thing and only thing I've done with it is buffed all the paintwork because the panel shop it lived at never finished the job lol.

http://i582.photobucket.com/albums/ss263/soulbinder/2012-06-07114911.jpg

http://i582.photobucket.com/albums/ss263/soulbinder/2012-06-07114959.jpg

need to get some amber corners asap


Try This E-bay Shop for The Amber Corners
http://www.ebay.com.au/sch/rrr092009/m.html?item=260857422902&sspagename=STRK%3AMEWAX%3AIT&rt=nc&_trksid=p3984.m1423.l2649&_trksid=p4340.l2562
they are good people and I think good Prices

[KillerTofu]

Got a few things done LOL:
Got the bodywork done ready for paint, had it painted today by mate JJ at Xcustoms all ready for the showcase meet on saturday:
http://i1260.photobucket.com/albums/ii580/rays2701/047.jpg


New sticker representing for my boy James ISN IND:
http://i1260.photobucket.com/albums/ii580/rays2701/030.jpg
Also installed the following parts:
- Shifter extention
- Nardi deep corn
- Double din center console
- Full Honda hood bra
Got a few more parts to go in before the meet:
- BWR subframe brace
- BWR LCA's
- BWR Rear tow hook
- DENJI projector headlights

Will post pics when its all done ;)


Where did you find a double din ?!

Just painted car, didn't turn put crash hot but not that worried about it at the moment, will keep hitting it with polish and hope for the best!

http://img.tapatalk.com/31b064dd-ac30-d852.jpg

http://img.tapatalk.com/31b064dd-acea-6bae.jpg

Excuse the crappy photos.

Polished and added eg6 lip, still needs a lot more polishing.

Will be taking proper photos I'n a few weeks once proper wheels go on !

[dorikin]

adjusted my valve clearance, now my back is ****ed

[Rayseuro04]

Got a few things done LOL:
Got the bodywork done ready for paint, had it painted today by mate JJ at Xcustoms all ready for the showcase meet on saturday:
http://i1260.photobucket.com/albums/ii580/rays2701/047.jpg


New sticker representing for my boy James ISN IND:
http://i1260.photobucket.com/albums/ii580/rays2701/030.jpg
Also installed the following parts:
- Shifter extention
- Nardi deep corn
- Double din center console
- Full Honda hood bra
Got a few more parts to go in before the meet:
- BWR subframe brace
- BWR LCA's
- BWR Rear tow hook
- DENJI projector headlights

Will post pics when its all done ;)

More pics with everything fitted :)
http://i1260.photobucket.com/albums/ii580/rays2701/061.jpg
Nardi Deep Corn, Double Din center console.....Car is dirty LOL
http://i1260.photobucket.com/albums/ii580/rays2701/052.jpg
Full Honda OEM hood bra and DENJI projector headlights with HID
http://i1260.photobucket.com/albums/ii580/rays2701/059.jpg
BWR Subframe brace and LCA's
http://i1260.photobucket.com/albums/ii580/rays2701/055-1.jpg
BWR Tow hook.

Had all the parts fitted up in one night by my mate James at his shop Ison Industries in Blacktown.

[namtaro]

woo first post in this thread
was able to source out a 1 piece eg6 wing and installed it... now just need to colour code it
http://img822.imageshack.us/img822/5131/dsc01496yu.jpg

difference between 1pc(top) and 2 pc(bottom)...
http://img96.imageshack.us/img96/2120/wp000261.jpg
http://img594.imageshack.us/img594/231/wp000262.jpg

[Alexx]

namtaro your hatch looks great man, nice work! :thumbsup:

[namtaro]

namtaro your hatch looks great man, nice work! :thumbsup:

thanks alexxx... but can never match up to yours and the ffamily boys ><

[VT3C]

Rayseuro, LOVE the denji's.. where'd u find those?

namtaro, matching wing bros lol.

http://i89.photobucket.com/albums/k210/VTEChnique/VTEChnique%20May%202nd%202010/Bede_EG6_Wing_02.jpg

[namtaro]

VT3C - sickkkk... fav wing =D

gave the car a service... still dirty from the drive back from the-lowdown shocased sydney...

http://img402.imageshack.us/img402/654/wp000266.jpg

[hmetro24]

VT3C - sickkkk... fav wing =D

gave the car a service... still dirty from the drive back from the-lowdown shocased sydney...

http://img402.imageshack.us/img402/654/wp000266.jpg
what rims u've got ? any other pictures

[namtaro]

work meisters...
one from the showcased
http://farm8.staticflickr.com/7130/7487010342_69db39b565_b.jpg

[viinnh]

thought you sold them meisters

[namtaro]

thought you sold them meisters

i did... or did i? =P... always have too many sets ><

[mocchi]

fuark all these ballin egs
jelly bro

[Egxris]

got my carbon bonnet on.

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/205222_10150972826708237_1122006758_n.jpg

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-prn1/539801_10150942497688237_1546933576_n.jpg

[hmetro24]

It look like it's not sitting straight...
nice car

[Glocker]

put in double din console. looks good man.

http://img692.imageshack.us/img692/9632/img2054o.jpg

[SU-WOOP]

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/288387_241161812653672_721992531_o.jpg
burnt excess seam sealer to keep warm
i dont know what were doing but were doing something

[SU-WOOP]

put in double din console. looks good man.

http://img692.imageshack.us/img692/9632/img2054o.jpg

always wanted to put this on mout the head deck there and find the cupholders that go in the original single din

[Glocker]

always wanted to put this on mout the head deck there and find the cupholders that go in the original single din

terrible idea, the drinks would block the climate control.

[SU-WOOP]

Got a few things done LOL:
Got the bodywork done ready for paint, had it painted today by mate JJ at Xcustoms all ready for the showcase meet on saturday:
http://i1260.photobucket.com/albums/ii580/rays2701/047.jpg


New sticker representing for my boy James ISN IND:

http://i1260.photobucket.com/albums/ii580/rays2701/030.jpg
Also installed the following parts:
- Shifter extention
- Nardi deep corn
- Double din center console
- Full Honda hood bra
Got a few more parts to go in before the meet:
- BWR subframe brace
- BWR LCA's
- BWR Rear tow hook
- DENJI projector headlights

Will post pics when its all done ;)
http://photos-g.ak.fbcdn.net/hphotos-ak-ash3/550899_226034474166406_114685587_a.jpg
LOVN THE STYLE WHOS UR DESIGNER?pmsl-need sleep
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/311554_240901342679719_1626987819_n.jpg

[Rayseuro04]

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/288387_241161812653672_721992531_o.jpg
burnt excess seam sealer to keep warm
i dont know what were doing but were doing something

LOL good to see that blow torch has come in handy.

[Rayseuro04]

http://photos-g.ak.fbcdn.net/hphotos-ak-ash3/550899_226034474166406_114685587_a.jpg
LOVN THE STYLE WHOS UR DESIGNER?pmsl-need sleep
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/311554_240901342679719_1626987819_n.jpg

LOL bro you might know my designer.....names James got a shop in Blacktown Ison Industries... Big thanks bro if it wasnt for you the car wouldn't look as good as it does today

[SU-WOOP]

terrible idea, the drinks would block the climate control.
far better than hittn the back streets and spilln you drink

[Glocker]

far better than hittn the back streets and spilln you drink

that's why i stuck some cupholders down low. lower COG yo.

[mocchi]

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/288387_241161812653672_721992531_o.jpg
burnt excess seam sealer to keep warm
i dont know what were doing but were doing something

playing with blow torch right above fuel tank. lmzo

[SU-WOOP]

playing with blow torch right above fuel tank. lmzo
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/409632_241163405986846_1064051892_n.jpg
cyphoned that tank weeks ago as for progress on this build -SWEET FK ALL- too busy to play eg's and me are like flys to shit
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/413282_247285462041307_1037527575_o.jpg

only white civics on monday WTF big confusion

[Alexx]

so jealous of that workspace

[mocchi]

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/409632_241163405986846_1064051892_n.jpg
cyphoned that tank weeks ago as for progress on this build -SWEET FK ALL- too busy to play eg's and me are like flys to shit
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/413282_247285462041307_1037527575_o.jpg

only white civics on monday WTF big confusion

http://gifsforum.com/images/gif/dramatic%20look/grand/pug-dog-dramatic-look-eccbc87e4b5ce2fe28308fd9f2a7baf3-183.gif

fuking wyn! is that like 5 eg in the workshop

[SU-WOOP]

so jealous of that workspace
when it become a carpark and theres no space for work! FML

[namtaro]

out with the old
http://img194.imageshack.us/img194/2864/wp000277n.jpg

miracles can happen =P (dont mind my crappy trim... bought the car like that... so sad =[)
http://img688.imageshack.us/img688/1658/savedpicture5.jpg

[Vvvtec]

need to get me one of those

notice any difference?

[Rayseuro04]

Got my EG some new wheels:

http://i1260.photobucket.com/albums/ii580/rays2701/041.jpg
http://i1260.photobucket.com/albums/ii580/rays2701/042-1.jpg
http://i1260.photobucket.com/albums/ii580/rays2701/043.jpg

[charliebrown]

Got into a fight with a pole at uni. Top part was fkd, went in to bare metal and had started to rust. Bottom bit had a few deep scratches that went through the clear coat, couldn't polish them out. Not bad for a 15 minute quick fix ay

Before:
http://farm9.staticflickr.com/8026/7697054616_a127ee4f6c_z.jpg

After:
http://farm8.staticflickr.com/7134/7697036242_cd92cf461d_z.jpg

Before:
http://farm9.staticflickr.com/8283/7697043334_80b7d5fb1f_z.jpg

After:
http://farm8.staticflickr.com/7107/7697025724_66bef811e9_z.jpg

Got the commo reverse caravan shit going on. Reckon lower front half an inch or raise the rear and rock a beaks?

http://farm9.staticflickr.com/8286/7697068868_a6dabe4a7d_z.jpg

[dorikin]

Fresh brakes

http://img849.imageshack.us/img849/7871/img3576n.jpg

[namtaro]

lol charlie... lower front... beaks bar... make sparks fly... you get the drift =P

[Loagz]

Changed the ps fluid.

It was so black it looked like engine oil, good as new now.

[cnez]

road trip to snowy mountains area. cold as in the morning.

http://img803.imageshack.us/img803/7438/p8020015.jpg

random sheep rocked up too.

http://img585.imageshack.us/img585/5904/img20120803090014.jpg

[Rayseuro04]

Fitted my new Carbon wing, visors and tried out some Plasti-Dip on the roof:
http://i1260.photobucket.com/albums/ii580/rays2701/016.jpg
http://i1260.photobucket.com/albums/ii580/rays2701/017.jpg
http://i1260.photobucket.com/albums/ii580/rays2701/018.jpg
http://i1260.photobucket.com/albums/ii580/rays2701/020.jpg

Next on the list to do is get some new seats :)

[Gtstripes]

wash n waxed ;)

http://i877.photobucket.com/albums/ab333/gtstripes90/IMAG0373.jpg

http://i877.photobucket.com/albums/ab333/gtstripes90/IMAG0367.jpg

[zhong]

http://www.zcd.com.au/eg/washy.jpg

[caljones]

Bought new wheels
http://i252.photobucket.com/albums/hh38/cjone252/997885cdb399cbe119b221445bcbd335.jpg
http://i252.photobucket.com/albums/hh38/cjone252/a3cbfa8ac0ea7fe172bc946fe5ede224.jpg

Red dots are burns from a laser pointer...

[2MPRS]

decided to fix my faded bumper first attempt at painting turned out pretty good
http://i48.tinypic.com/34erlf7.jpg

[Glocker]

http://img705.imageshack.us/img705/3655/img2162em.jpg

[ekx105]

^ Nice steering wheel man!!

[Glocker]

^ Nice steering wheel man!!

cheers bro, can't go past ur nardi but lol

[charliebrown]

Hey bro with those does it sit much closer to your cheast? And do you get problems with da indicator stick 2 far

I got short legs and finkin if i adjust seat to clutch in, the deep corn would be 6 inches from my pectorals

[Glocker]

Hey bro with those does it sit much closer to your cheast? And do you get problems with da indicator stick 2 far

I got short legs and finkin if i adjust seat to clutch in, the deep corn would be 6 inches from my pectorals

yes much closer, with the hkb hub. i'm 178cm but i can clutch in, full throttle or heel toe just fine, my arms are bent at a 90 degree angle. the steering has 95mm of dish for your info.

[EKVTIR-T]

Hey bro with those does it sit much closer to your cheast? And do you get problems with da indicator stick 2 far

I got short legs and finkin if i adjust seat to clutch in, the deep corn would be 6 inches from my pectorals

Depends on how thick da boss kit is but Ive got similar dish wheel and reasonably long fingers and its annoying reaching for da indicator

you might be better with the less dish ones

[charliebrown]

yes much closer, with the hkb hub. i'm 178cm but i can clutch in, full throttle or heel toe just fine, my arms are bent at a 90 degree angle. the steering has 95mm of dish for your info.

fuuu 95mm dats mass. cheers bru


Depends on how thick da boss kit is but Ive got similar dish wheel and reasonably long fingers and its annoying reaching for da indicator

you might be better with the less dish ones

what about something like this? looks butiful and doesnt look like P plater cheap ass chinese mod

http://www.ebay.com/itm/320MM-BATTLE-STYLE-JDM-RACING-STEERING-WHEEL-FIT-6-BOLT-HUB-ADAPTER-BLACK-RED-/221033046155?pt=Motors_Car_Truck_Parts_Accessories&hash=item337698a08b&vxp=mtr

[Glocker]

fuuu 95mm dats mass. cheers bru



There's 65mm version.

[EKVTIR-T]

what about something like this? looks butiful and doesnt look like P plater cheap ass chinese mod

http://www.ebay.com/itm/320MM-BATTLE-STYLE-JDM-RACING-STEERING-WHEEL-FIT-6-BOLT-HUB-ADAPTER-BLACK-RED-/221033046155?pt=Motors_Car_Truck_Parts_Accessories&hash=item337698a08b&vxp=mtr
Pretty naice,try to get matching seat covers

[jdm18c]

http://img.tapatalk.com/31b0435c-778e-0750.jpghttp://img.tapatalk.com/31b0435c-779d-7a19.jpghttp://img.tapatalk.com/31b0435c-77ad-705e.jpghttp://img.tapatalk.com/31b0435c-77bf-1797.jpghttp://img.tapatalk.com/31b0435c-77d1-734f.jpghttp://img.tapatalk.com/31b0435c-77e7-a445.jpg
http://img.tapatalk.com/31b0435c-785e-01fd.jpghttp://img.tapatalk.com/31b0435c-7885-3843.jpg
Sold my baby to a guy from Melbourne yesturday :/

[hmetro24]

Nice car but it's way too black

[Glocker]

Painted calipers in Spoon colour?

[EKVTIR-T]

Painted calipers in Spoon colour?
Pretty sure its genuine JDM paint

http://northriverfalls.com/images/uploads/tamiyapaints/TAM86016.jpg

[Vvvtec]

what did that sticked on the hatch window say?

[EKVTIR-T]

ivtec sucks

[jdm18c]

Painted calipers in Spoon colour?

It was Holden perfect blue

[dorikin]

Spoon Rigid Collar kit eat your heart out

http://img208.imageshack.us/img208/477/img3966f.jpg

[Glocker]

Spoon Rigid Collar kit eat your heart out

http://img208.imageshack.us/img208/477/img3966f.jpg

What's this? Stiff ring?

[dorikin]

DIY stiffy lol

[shepparton]

what the hell is that?

[2MPRS]

finally put my eg9 front lip and wing on
http://i49.tinypic.com/xfrzv9.jpg

[EG8 CIVIC]

nice^^ where did you find the lip?

[2MPRS]

some guy on ozhonda had one for sale post on the wtb thread a few people are selling.

[ejsalcepuedes]

installed a different lip on the eg. mugen style

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/525903_10150723887612539_738212538_9203183_5315651 27_n.jpg


Where did you get that air duct?

[CivicEGSI]

Some kunt sell me a fukin crx shell

[SU-WOOP]

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-prn1/36555_258957064207480_1189385653_n.jpg
just a follow up burnt out all the seam sealer time to seam weld follow the progress @ http://www.facebook.com/IsonIndustries?ref=hl

[SU-WOOP]

they dont have an **OFFICIAL WHAT DID YOU DO TO YOUR PALLET JACK TODAY** so i thought i share it her for shits and giggles http://sphotos-d.ak.fbcdn.net/hphotos-ak-ash4/c0.339.720.344.19928825623/p843x403/285531_257368271033026_1820245146_n.jpg

[mocchi]

hahahaahh fuking wyn m8
wat a beast

[SU-WOOP]

http://sphotos-e.ak.fbcdn.net/hphotos-ak-snc6/c0.0.403.403/p403x403/252513_260246700745183_661500171_n.jpg clearance issues anyone?

[namtaro]

installed my benen strut bar
http://imageshack.us/a/img6/6962/wp000335.jpg

[GU357]

fixxed the door sill pane where the plastic had cracked next to window controls.

adjusted the accelerator to stand more flush with the other pedals, also allows the throttle body to get all the way to WOT
where as before the pedal would bottom out, at 90%.
also sits at better height for heel-toe-ing.

[charliebrown]

went back to stock yo. So comfy n quiet, might keep it this way lmzo dat hassle free motoring

[na-118]

nearly finished!

http://imageshack.us/a/img267/5215/p9220152.jpg (http://imageshack.us/photo/my-images/267/p9220152.jpg/)

[shepparton]

http://imageshack.us/a/img38/3338/engine2gy.jpg (http://imageshack.us/photo/my-images/38/engine2gy.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

custom DIY 3" intake with k&N filter

[Vvvtec]

nearly finished!

http://imageshack.us/a/img267/5215/p9220152.jpg (http://imageshack.us/photo/my-images/267/p9220152.jpg/)

Youre wrinkle turned out great man! What brand paint di you use?

[na-118]

i used VHT Wrinkle Plus,

if you require a picture of the can let me know,

turned out great,

welded bungs on
sandblasted the valve cover
prep with wax and grease remover
and applied the vht
and i used heat gun , got it up to temperaute and kept it there, using a thermo infared gun

[Super-DA9]

nearly finished!

http://imageshack.us/a/img267/5215/p9220152.jpg (http://imageshack.us/photo/my-images/267/p9220152.jpg/)

Lookin' Good :thumbsup:

[na-118]

thanks guys

what do you think of spraying my itr manifold that wrinkle black as well?




Lookin' Good :thumbsup:

[GU357]

smexxy!

[Egxris]

made it look rwc ghey

http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash3/545308_10151047774402539_1708558267_n.jpg

[jason210493]

Got my eg into an accident few days ago at mount dandy, wheels are buckled but luckily no body damage. haha

[GU357]

made it look rwc ghey

http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash3/545308_10151047774402539_1708558267_n.jpg

Nice
5 stud conversion plus ITR rims. me likey.
Are the ITR wheels light like JDM rims, or heavy like stock alloys.

[charliebrown]

made it look rwc ghey

[IMG]http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash3/545308_10151047774402539_1708558267_n.jpg[/IMG

what u get done for m8? wasnt exactly a pig magnet nor was it loud?

[Egxris]

got caught in a police tarp. not having 3/4 travel, too low (measured it and it was 130mm lol (Mugen d pipe under neath was 60mm fffk), indicator out (fender didnt even realise) number plate light out, and HID's.

[Egxris]

Yeh its running ITR suspension arms brakes, wheels etc. The ITR's dont weigh too much(made by Enkei) but the wheels i normally run weigh alot less(Weds Sport SA90). Was looking like this a week ago.......

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-snc6/204694_281471135302288_1797366158_o.jpg

[charliebrown]

Fukn pigs go catch some real criminals ay your car was a nice streeter and they still got ya. Biggest joke, melbournes fkd

[PHO]

Fakkk they're really getting onto us. Scared naos

[Glocker]

Fukn pigs go catch some real criminals ay your car was a nice streeter and they still got ya. Biggest joke, melbournes fkd

rip jill meaghan

[charliebrown]

was talkin to the bloke at vicroads. he said lots of holdens come in, 10x worse defects than my car (bald tyres, lights out etc) and dont need RWC

but if a jap car gets defected, all major + RWC

racist mothers...

wtb commo

[Red_EG4]

A month or so ago my car looked like this;

http://i164.photobucket.com/albums/u27/Postie_Boy/DSC_0119.jpg

The following day I got defected and so my car looked like this;

http://i164.photobucket.com/albums/u27/Postie_Boy/DSC_0305.jpg

Today I got my wheels out of the shed and gave them a good wash and put them back on. So much tyre to arch gap :eek: So it looks like this now;

http://i164.photobucket.com/albums/u27/Postie_Boy/DSC_0333.jpg
http://i164.photobucket.com/albums/u27/Postie_Boy/DSC_0334.jpg

[GU357]

if im honest the first 2 looked almost the same, from that distance.
was the car actually too low to pass?

[Red_EG4]

Cat was about 70-75mm clearance in first pic and more like 125mm in the second.
The stock 14s sink in more and hide the gap.

[Alexx]

looks great on the rpf1 man! Real clean :thumbsup:

Cant believe you got done at the before height though, vic must suck

[Red_EG4]

Thanks Alex
I had driven at that height for a year or two.
It was a blitz with police up from the big smoke that got me in a nowhere town.

[Daveho1]

today i got a b18c2 for my EG

[Egxris]

today i got a b18c2 for my EG

welcome to awesome town :D

[namtaro]

nahhhh b18c/b18c7 better =P

[Super-DA9]

nahhhh b18c/b18c7 better =P

This is true but he's gonna build it so it really doesn't matter whether its a c2/c7

[2MPRS]

finally decided to put new bushings in for the rta thought it was going to be hard without a press but alot easier than i expected
http://i48.tinypic.com/90aqna.jpg

[Super-DA9]

finally decided to put new bushings in for the rta thought it was going to be hard without a press but alot easier than i expected
http://i48.tinypic.com/90aqna.jpg

What RTA bushings are they?

[2MPRS]

some brand called powerflex they make full kits from the uk i think it was like 60bucks for the tra bushings on ebay delivered

[dorikin]

Did u have to reuse ur old outer case? Or it comes prefitted

[2MPRS]

had to reuse the old outer case just burnt all the stuff out of it and made a really dodgy clamp with a spring clamp and and some spare metal i had laying around to get it in kinda like this http://hondaswap.com/general-tech-maintenance/rear-trailing-arm-bushing-install-tool-diy-how-292065/

[dorikin]

Sweet let us know ur impressions once they're back in

They look very solid, no holes to flex or twist

[2MPRS]

will do probs wont install for atleast a week or 2 as im going on holidays but if u guys want ill do a writeup for it?

[namtaro]

sprayed and fitted my powered spoon mirrors... not one of my best jobs but i really got lazy after a while...
http://imageshack.us/a/img5/6480/13341910151093620268424.jpg

yay or nay? cant decide

[2MPRS]

i say yay.
whats the visibility with those compared to stock?

[namtaro]

they use the blue mirrors so like everything in the mirrors look further than what they really are if you get what i mean.

[charliebrown]

sick mirrors nam ;) ahhah you got to work quick on spraying them

isnt the purpose of the blue glass to stop glare from other cars headlights

[PHO]

blue is for the glare, absorbs all the red light since most of the headlight output is in red spectrum. so only lets blue pass through so there's less strain onyour eyes at night.

/engineering student


oh and there are the blue mirrors which have a different angle on the outer side of the mirror (furthest from you) so it allows you to see whats in your blind spot. These mirrors usually have a line to show the boundary of the two angles to let you know what you're looking at (normal mirror or blind spot)

[namtaro]

sick mirrors nam ;) ahhah you got to work quick on spraying them

isnt the purpose of the blue glass to stop glare from other cars headlights

thanks man... thanks to you for selling it hahaha... yerh had to put them on... coz they looked so lonely in the back seat ><

[EKVTIR-T]

cb auto exterior enhancements

[Gtstripes]

stripped paint off rota jspl's :) ready for powdercoat!

[SuperJDM.]

i say yay.
whats the visibility with those compared to stock?

they were MUCH better than OEM ones IMO

[2MPRS]

thinking of getting some so hard to find for sedans though :(

[shepparton]

just dyno tuned

http://www.youtube.com/watch?v=UhEB3U3tI2M&feature=youtu.be

[2MPRS]

how much power?
edit. nvm saw the other thread

[shepparton]

tuned stop at 163.3 kw with extension pipe intake showing on the video, 154.3 kw with shorter intake pipe

just ordered bisi header, going for the next tuned in couple months for bigger and better number. It Feels like there is something holding back atm

[Glocker]

thinking of getting some so hard to find for sedans though :(

http://www.ebay.com/itm/271006223474?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

not sure how good they are though

[2MPRS]

http://www.ebay.com/itm/271006223474?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

not sure how good they are though
ooo thanks for that i always use ebay.com.au am i doing it wrong? should i just be using ebay.com?

[na-118]

you just got it tuned by byp why are you looking for a re tuner may i ask

[Glocker]

ooo thanks for that i always use ebay.com.au am i doing it wrong? should i just be using ebay.com?

doesn't really matter, i found it from the international dealers section...

[Glocker]

you just got it tuned by byp why are you looking for a re tuner may i ask

if u read correctly he's ordering and fitting the bisi header, that's why he'll be retuning it

[collEGe_boy]

Got me some fresh ADVAN A048s (205/50 R15) wrapped on limited edition white Buddyclub P1s, 15x8 +32 :D

The rubber is so fat I'm gonna need to raise the car just to steer haha.

2311523116

Probably should start a build thread...

[na-118]

how much you get them tyres for brah

[collEGe_boy]

$249 a tyre, fitted and balanced. And Yonas wanted to charge me $325 a tyre (excluding fitting) after I spent $900 on wheels ==

[na-118]

GG you saved heaps man good on you!. where abouts did you get them tyres, i'm looking into a set of slicks at the moment

[collEGe_boy]

cheers :) I got them from Tyres and More in wetherill park (next to the maccas on horsley drive). Good shop man, they really looked after me. At one point he was even willing to sell me the tyres at a loss! But later on he got a better price. Also they are into motorsports so probly a good place to get a wheel alignment or whatever.

However, for slicks you're probably best off going to Gordon Leven Motorsport Tyres. He supplies pretty much every racing team in NSW lol. The guy I bought the tyres from got them from this bloke, so go straight to the supplier man.

[shepparton]

if u read correctly he's ordering and fitting the bisi header, that's why he'll be retuning it

correct. but i wont go back to Byp again for sure, no offense to them.

[collEGe_boy]

tuned stop at 163.3 kw with extension pipe intake showing on the video, 154.3 kw with shorter intake pipe

just ordered bisi header, going for the next tuned in couple months for bigger and better number. It Feels like there is something holding back atm

wow that's a big difference in power! Interesting... Is that due purely to colder are do you reckon?

[Vvvtec]

correct. but i wont go back to Byp again for sure, no offense to them.

Seems pretty good for a cammed h22. How much more are you expecting?

[na-118]

i might run extension pipe 3 metres infront of my car for extra 10kws LOL
tuned stop at 163.3 kw with extension pipe intake showing on the video, 154.3 kw with shorter intake pipe

just ordered bisi header, going for the next tuned in couple months for bigger and better number. It Feels like there is something holding back atm

[Vvvtec]

Lmaoooo

[shepparton]

sound silly, isnt it??


Seems pretty good for a cammed h22. How much more are you expecting?

not sure, thats y i m searching the reliable tuner to find out, while i am doing that .. i am upgrading the header to get better power for sure

[shepparton]

wow that's a big difference in power! Interesting... Is that due purely to colder are do you reckon?

someh2b in us doessnt use long pipe but still making power than 163 kw atw, with stage 1 cam or some without cam lol just simple header, bigger tb, bigger exhaust etc

[CivicEGSI]

dat engrish

[Glocker]

someh2b in us doessnt use long pipe but still making power than 163 kw atw, with stage 1 cam or some without cam lol just simple header, bigger tb, bigger exhaust etc

Don't trust dyno figures from Americans, they like to run funny numbers. A cammed H2B with 160kw atw is more than reasonable

[Vvvtec]

This ^^

You should be very happy with your power!

[89lude]

Glocker is on the money! From our research and experiences the stage 1 cam is better for a stock motor too btw.

[shepparton]

By the way my motor is currently running 155 kw tuned map, i m not sure about 163 kw which i d like to find out by going for another tuning to different tuner.
My tunning session is like test bunny on that day. I feel like the car not really tuned properly by them since the cam gear also hasnt been played and set properly

163 could be fake or real number on his laptop and dyno sheet because i have shorter intake pipe so they gave me 155 kw tuned map

[shepparton]

checked my motor today because tapping noise after tuning which make me confused why and i just found out my cam gear bolts on the exhaust side was loosened during tuning. The degree sat in wrong safe spec, this is so farkk

[collEGe_boy]

faark! Who tuned it? Do you know if any damage was caused?

[na-118]

Byp tuned it check his previous post

[shepparton]

faark! Who tuned it? Do you know if any damage was caused?

byp tuned it and i am not sure if any damage because the head need to be removed to check it

[Glocker]

checked my motor today because tapping noise after tuning which make me confused why and i just found out my cam gear bolts on the exhaust side was loosened during tuning. The degree sat in wrong safe spec, this is so farkk

zomg...fuarrkkkk....that's no good.....

[collEGe_boy]

Are you gonna get them to check it for you? There is an inevitable dilemma with that, though...

In other news, I finally made some room in my garage to fit my little track baby :) she's nice and safe now

[R34P3R]

On friends EG hatch.

Sedan Lip + grinder = a nice fit =D

http://imageshack.us/a/img641/3053/20120929192523448.png

[Egxris]

Cleared my Defect :love::thumbsup:

[charliebrown]

Cleared my Defect :love::thumbsup:

planning to chuck all the stuff back on soon? dat stubbornness

[Egxris]

Should have it all on by next week. fking off the HID's as they were annoying. Bought some good H4's, also got some Password JDM gear to go in, shift linkage and ive already put my Radiator bracket on.

Going to do an oil change next week. so ordering in my HAMP filter and Honda Semi Syn Oil

[charliebrown]

Should have it all on by next week.

what about your RWC workshop? if you get done again wont they get fukd over

[Egxris]

well i got defected for dumb shit none of my mods that are going back on. cars not going under 100mm(wasnt before just the middle muffler hung abit low), all the lights are fixed, hid's removed. so everything i got done for has been fixed. i highly doubt (since i went through that many booze busses etc previously that i will be pulled over again and get dicked for other shit they didnt get me for on the last one.

+ i'll just use my trade plate for abit also. so theres no problems for them.

[collEGe_boy]

On friends EG hatch.

Sedan Lip + grinder = a nice fit =D

http://imageshack.us/a/img641/3053/20120929192523448.png

Nice DIY =]

[Egxris]

Transfered custom plates onto the civic :) PRIMAL !!

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-snc7/430398_10151072300607539_599603302_n.jpg

[SU-WOOP]

sorry couldnt find an **OFFICIAL WHAT DID U DO TO SOMEONE ELSE'S CIVIC TODAY** so i thought id post it here
8 WHITE EG'S IN ONE DAY WHAT A BRAIN FRYER!http://sphotos-g.ak.fbcdn.net/hphotos-ak-snc6/9069_10151088378895036_2063188052_n.jpg

[Super-DA9]

sorry couldnt find an **OFFICIAL WHAT DID U DO TO SOMEONE ELSE'S CIVIC TODAY** so i thought id post it here
8 WHITE EG'S IN ONE DAY WHAT A BRAIN FRYER!http://sphotos-g.ak.fbcdn.net/hphotos-ak-snc6/9069_10151088378895036_2063188052_n.jpg

Holy Crap. Where do you work bro??!

[SU-WOOP]

http://www.facebook.com/IsonIndustries?ref=hl

[Super-DA9]

My god that place looks like fun.

[SU-WOOP]

My god that place looks like fun. heaven and hell at the same time by them time all the work is done im too tired to work on my own car then i relax have a drink and a think heres my situation atm http://sphotos-e.ak.fbcdn.net/hphotos-ak-snc7/486772_268234749946378_100800195_n.jpg

[Egxris]

Started returning my car back to normal lol put the bride seat back in and the nardi. Normal headlights are so shit. hid's are going back in.

[shepparton]

lol, my Eg bonnet sitting higher than stock and the intake piping so visible from the bonnet gap, my exhaust a bit loud but i never had problem so far. lucky i dont live in melb .

[zhong]

http://www.zcd.com.au/eg/Projector.jpg

Got around to installing my new lights!

[Mr. Focus]

Last Friday: Bought myself an EG4! Downside, its D15B7 powered. Upside, its EFI which should make the engine swap easier :D
Today: Installed the head-unit that came with the car that wasnt wired up. I also installed a new set of speakers after finding out the ones they left in it were f**ked (by f**ked, i mean the cones looked like swiss cheese!!). I now have beats after driving around for a week with no music

[GU357]

all my eg4 speakers are blown too. treble sucks bum.

[Rayseuro04]

http://www.zcd.com.au/eg/Projector.jpg

Got around to installing my new lights!

Headlights look good bro.
Here is a pic of mine:
http://i1260.photobucket.com/albums/ii580/rays2701/029-1.jpg

[zhong]

Headlights look good bro.
Here is a pic of mine:
http://i1260.photobucket.com/albums/ii580/rays2701/029-1.jpg

Sick! How's your cut off? And do you have a provision for parker lights? Mine doesn't but I might need to make one but not sure if it'll do the projectors justice...

[Egxris]

Lowered it and put my Weds back on :D

[Rayseuro04]

Sick! How's your cut off? And do you have a provision for parker lights? Mine doesn't but I might need to make one but not sure if it'll do the projectors justice...

Hey bro nah mine doenst have provision for parkers either...was gonna run my amber corners as parkers but i cant be bothered doing it now lol......The cut off is good the DENJI lights are sooooo much better than the standard headlights and you dont blind anyone by having HID's in your standard headlights.

[Egxris]

i put standard h4's back in and couldnt see shit. so back goes in the hid's at least its now safe to drive at night lol

[namtaro]

still running stock yellow oem bulbs for the win =)

[Glocker]

Put ASR endlinks on and it got bent by the time I got to 999 auto. Luckily James at Ison Industries put it up on the hoist and fixed it for me. Also remounted the room bar, put in a long eyebolt for the racing harness and rewired up the giant tacho, now I can haz shiftlight!

[GU357]

Hey bro nah mine doenst have provision for parkers either...was gonna run my amber corners as parkers but i cant be bothered doing it now lol......The cut off is good the DENJI lights are sooooo much better than the standard headlights and you dont blind anyone by having HID's in your standard headlights.

still can get defected for it though.

[viinnh]

think those were my old headlights hahah

[Rayseuro04]

still can get defected for it though.

If people are worried about defects why modify your car at all LOL.....

[namtaro]

to get defected then the worries go away =P

[GU357]

If people are worried about defects why modify your car at all LOL.....

lol means its nice to have projectors but at the end of the day its only half way.
and cops can be stingey on the whole hid business

[namtaro]

so hated my crpapy checkered door trims so decided to do a diy... went to Spotlight and bought the soft suede in black... did it all and when i put it up next to the bride seats... they were more like dark navy... so dont buy suede from spotlight LOL

but they turned out good and will suffice until i find black black ones LOL

http://img31.imageshack.us/img31/9937/17595110151139339223424.jpg

[Super-DA9]

so hated my crpapy checkered door trims so decided to do a diy... went to Spotlight and bought the soft suede in black... did it all and when i put it up next to the bride seats... they were more like dark navy... so dont buy suede from spotlight LOL

but they turned out good and will suffice until i find black black ones LOL

http://img31.imageshack.us/img31/9937/17595110151139339223424.jpg

I've got the same Brides in my teg!

[namtaro]

yerh i love them... so comfy... was the best when i went up to sydney for showcased

[Vvvtec]

how much and where from?

[GU357]

my friend has "drift" brand seats look just like them, but his are hard as a rock, and the bottom is kind of rounded in so it feels like its squeezing ur ass from the sides, just poor design dont get them

[Super-DA9]

how much and where from?

Mine were a private sale, and I'm not sure I should spill how much I got 'em for, but it was a very worthy deal ;P

[Super-DA9]

my friend has "drift" brand seats look just like them, but his are hard as a rock, and the bottom is kind of rounded in so it feels like its squeezing ur ass from the sides, just poor design dont get them

Yeah "Drift" Blades looks similar as they are both based on the R34 GTR seats, the Drift ones will certainly not be of the same quality and material as the Brides.

[namtaro]

lol yerh mine were cheap too... found off ebay and stuff >< lol

[GU357]

might be the taiwan Brides, since Bride has some issues with registering their name internationally taiwan and canada started making copies and selling them as "BRIDE". so u get dam near exact replicas, at decent price. quality isnt bad, but probably dont last aslong. but if they hold u nice n tight, then who cares.

im trying to get myself a Bride RO/MO rail or a DC2r driver rails so i can mount my SR3.
so far the best bucket seat i have sat in.
so comfortable and perfect width for skinny me.

[hilarryous]

might be the taiwan Brides, since Bride has some issues with registering their name internationally taiwan and canada started making copies and selling them as "BRIDE". so u get dam near exact replicas, at decent price. quality isnt bad, but probably dont last aslong. but if they hold u nice n tight, then who cares.

im trying to get myself a Bride RO/MO rail or a DC2r driver rails so i can mount my SR3.
so far the best bucket seat i have sat in.
so comfortable and perfect width for skinny me.

So hard to find rails for sr3s. I'm trying to find some for my ek, and I'm not even sure if dc2 rails will fit an ek. :(

[GU357]

nah they wont.http://myworld.ebay.com.au/everspring_sports/&_trksid=p3984.m1497.l2754
that guy sells good ek eg dc parts. gets bride rails recaro rails.

to mount a SR3 to a EK u need a bride RO for an EK, might work with a ek9 rail (the CTR version)

[namtaro]

might be the taiwan Brides, since Bride has some issues with registering their name internationally taiwan and canada started making copies and selling them as "BRIDE". so u get dam near exact replicas, at decent price. quality isnt bad, but probably dont last aslong. but if they hold u nice n tight, then who cares.

im trying to get myself a Bride RO/MO rail or a DC2r driver rails so i can mount my SR3.
so far the best bucket seat i have sat in.
so comfortable and perfect width for skinny me.

lol at u... they were second hand ones and not new fake replicas wateva u wanna call them or else i wouldnt be rocking them... when i meant ebay... means i bidded on second hand, bought them seperately... k thanks =)

[GU357]

lol at u... they were second hand ones and not new fake replicas wateva u wanna call them or else i wouldnt be rocking them... when i meant ebay... means i bidded on second hand, bought them seperately... k thanks =)


lol yerh mine were cheap too... found off ebay and stuff >< lol

no need to get buthurt bro, just ebay is like the most common place to buy the copy brides.
u just said they were cheap and summed it up very vaguely. either way it was no insult (^_^)

[na-118]

replica for the win,

[Super-DA9]

might be the taiwan Brides, since Bride has some issues with registering their name internationally taiwan and canada started making copies and selling them as "BRIDE". so u get dam near exact replicas, at decent price. quality isnt bad, but probably dont last aslong. but if they hold u nice n tight, then who cares.

im trying to get myself a Bride RO/MO rail or a DC2r driver rails so i can mount my SR3.
so far the best bucket seat i have sat in.
so comfortable and perfect width for skinny me.

Yeah I know about the replicas, which actually seem pretty good for the price to be honest. But I'm sure mine are genuine, from japan not taiwan.

[jdmEG5]

Edit: actually i painted my rocker cover today :)

http://photos-e.ak.fbcdn.net/hphotos-ak-ash3/s720x720/534100_10151160701912979_290602679_n.jpg?dl=1

[dorikin]

what a beast

[GU357]

try one of these! (http://www.ebay.com.au/itm/Custom-Honda-CIVIC-CRX-Acura-Integra-valve-cover-B16-B18C-Vtec-VROOM-/350534190199?pt=Motors_Car_Truck_Parts_Accessories&hash=item519d774477&_uhb=1)

[Egxris]

try one of these! (http://www.ebay.com.au/itm/Custom-Honda-CIVIC-CRX-Acura-Integra-valve-cover-B16-B18C-Vtec-VROOM-/350534190199?pt=Motors_Car_Truck_Parts_Accessories&hash=item519d774477&_uhb=1)

lol what a piece of crap.

I run Bride EuroII's in my 180 not bad daily seats. Bucket seat in the civic ftw.

Installed my Password JDM bushes and in the middle of redoing my exhaust

http://hondaperformancepartswarehouse.co.uk/images/uploads/PWJDM/pjdm%20shift%20bush.jpg

[mocchi]

try one of these! (http://www.ebay.com.au/itm/Custom-Honda-CIVIC-CRX-Acura-Integra-valve-cover-B16-B18C-Vtec-VROOM-/350534190199?pt=Motors_Car_Truck_Parts_Accessories&hash=item519d774477&_uhb=1)

m8 its not vroom, its boooobobobaBAAAAAAAAAAAAAAAAAAAAAAA

[GU357]

lol, yeh not the coolest, but looking at their stuff they got some nice paint jobs there

also put in Bride RO rails from DB/DC into EG and put in my SR3, seating is so low, cant see the guages cause steerign wheel is there yolo

[Vvvtec]

You like 4foot tall? Yolo indeed

[GU357]

nah im 6 foot, but to get the steering wheel at right height, which is ergonomic then ur hand must be at 9 and 3 sitting around shoulder height.
which makes the top of the wheel cut off the top of the guages.