PDA

View Full Version : d16y4 into eg


oocus
29-01-2011, 11:06 PM
gday, just new so please excuse my igorance. i have a EG VEI with caput engine. i have a EK with a caput rear. i want to replace the problem D15Z1 in the EG with the D16Y4 out of the EK. what is involved ? ECU ? harness ? ........ any help is much appreciated. i have the 2 cars beside each other in my shed, i have all the tools, need it done asap need a car! thanks again. does anyone have specs on these engines?
dorikin
29-01-2011, 11:16 PM
http://www.ozhonda.com/forum/showthread.php?74154-d16y4-into-eg-civic
SajadEG
29-01-2011, 11:21 PM
bolt in swap

use eg throttle body and throttle cable
use eg manifold
use eg mounts
eg wire harness
and keep ur original throttle plate and fuel injectors

u can run the current ECU, maps arent too different
however when mine was done it had some idle problems, it could be related.
dorikin
29-01-2011, 11:23 PM
bolt in swap

use eg throttle body and throttle cable
use eg manifold
use eg mounts
eg wire harness
and keep ur original throttle plate and fuel injectors

u can run the current ECU, maps arent too different
however when mine was done it had some idle problems, it could be related.

how can he run his current ECU? its a 1.5L vtec ECU
oocus
30-01-2011, 08:36 AM
thanks for your help so far. why would i change the inlet manifold and mounts etc on the d16y4 for the ones currently on the d15z1. the d16y4 is in perfect order, i was planning on doing complete drivetrain swap, as i have a complete EG. dont mind changing harness, ecu, etc as i have all this, just need to know if i HAVE to change them. this is a job i only want to do once. they are both 5 speed so this is not a concern. with the d15z1 being fuel injected there is no need to replace fuel pump or lines( i have read elsewhere this might be neccesary) or is there? thanks again. :honda::thumbsup:
oocus
30-01-2011, 04:40 PM
gday, thanks for help. why keep all that stuff from the EG, why not just change complete drivetrain? cheers
SajadEG
30-01-2011, 09:10 PM
how can he run his current ECU? its a 1.5L vtec ECU

oops didnt read properly...saw the d15z1 just now

cant run the same ECU, i thought i read d15b7