PDA

View Full Version : b18c EG


euro1986
30-01-2011, 09:30 PM
Went to willowbank yesterday got a 13.9 My first attempt at racing....in a B18c7 EG with back seats taken out....stock motor (I,H,E)

good, bad or average???

any tips to improve?
honda_b_blastn
31-01-2011, 10:22 AM
Provide some more info and you will get some advice...what 60ft,tyres,pressures,sussy,camber,caster,mile an hour...
bennjamin
31-01-2011, 10:31 AM
13.9 is great. But tell us this

exact EG type ( si , vti , breeze etc ) sedan or hatchback ?
exact tyres used
exact GVM ( your cars weight , minus the driver )
exact 60ft and MPH at the 1/4 .....



as an example I got a pb of 13.7 @ 103mph , jdm 4-1 header standard ITR exhaust intake . EP3r muffler. full interior etc - ps and ac removed. sunroof intact. 980kg without driver.Tyres were bridgestone RE001's.
euro1986
31-01-2011, 09:59 PM
Its a EG Si Hatch
Toyo T1R
Dont know the exact weight
Did 13.9 @ 95.29mph with a 60ft of 2.200
iijjee
17-04-2011, 09:24 PM
Looks like excellent traction as this is relatively low mph for a high 13sec run. Congrats! For your first time, that's a great run!

Interested to know what rpm and how you handled the clutch!?!
crobaa
11-05-2011, 12:48 PM
I'm curious what rpm you launched at? Is it worth launching lower and having traction or launch higher and just deal with the wheelspin?
iijjee
11-05-2011, 02:39 PM
Launching is crazy hard - and different with every tyre! On my EGB18CR I found 2000rpm - bog for half a second, 3000rpm - bog for half a second, 4000rpm - wheelspin and wheel hop. Anywhere between? either or!!!! If you invest in traction bars and up the tyre quality, you could prob launch higher, but on semi or street rubber, lower actually works better than on the street imo!
crobaa
11-05-2011, 04:21 PM
I have the same car/engine and have the same problem. Do you ride the clutch at all? I find even launching at say 2k if I put my foot down the whole way it just keeps frying the tyres so have to take it easy on launch. Running 195 toyo proxes.
shepparton
11-05-2011, 05:34 PM
im first timer too so i reckon tyre pressure also help i thnk the guys above did 13.7 with 20 psi or ask him
when i went to the drag first time i was running 30 psi lol,, coz i dont wan to run out my tyre quickly
crobaa
11-05-2011, 07:30 PM
Hmmm there's so many little factors to change in drag racing
DC2-PWR
14-05-2011, 10:07 AM
Went to willowbank yesterday got a 13.9 My first attempt at racing....in a B18c7 EG with back seats taken out....stock motor (I,H,E)

good, bad or average???

any tips to improve?


Do you mean internally stock and you have I/H/E

Or do you mean you have stock I/H/E?
euro1986
29-06-2011, 03:25 PM
Looks like excellent traction as this is relatively low mph for a high 13sec run. Congrats! For your first time, that's a great run!

Interested to know what rpm and how you handled the clutch!?!

Thanks mate....I launched at about 4000rmp but rode the clutch for a bit before flooring it.
euro1986
29-06-2011, 03:27 PM
Do you mean internally stock and you have I/H/E

Or do you mean you have stock I/H/E?

stock motor...injen intake, replica tri-y headers and custom 2 1/4 inch exhaust.
euro1986
08-07-2011, 09:36 AM
second attempt gave me 13.856 @ 102.53mph 60' 2.243
bennjamin
08-07-2011, 11:34 AM
nice times. MPH should give you a 13.6 with perfect launch and 1/2nd gears ! my pb was about 2.1 60ft and 103/13.7
euro1986
08-07-2011, 03:43 PM
thanks mate 13.6 sounds good


nice times. MPH should give you a 13.6 with perfect launch and 1/2nd gears ! my pb was about 2.1 60ft and 103/13.7