PDA

View Full Version : S2000 Seats


greek_rambos2k
08-02-2011, 11:12 PM
Helloo. Are the AP1 seats the same as the AP2 seats. as i was gunna buy a set of the sp2 headrest speakers and convert them for my ap1 but wanted to know if the bezel is the same on both seats so all i really have to do is run a wire. Thanks
zhong
09-02-2011, 10:04 AM
I thought AP2 seats didn't have the bezel from factory... Unless it was an option? Correct me if I'm wrong though.
LEWD
09-02-2011, 01:44 PM
Are you talking about the honda headrest speakers? If so, dont buy them they are rubbish.
garett
09-02-2011, 02:07 PM
apparently there are some aftermarket things you can buy which fit in the roll bar which fit 6" speakers in them.

JaimeP has them. looked pretty good.
LEWD
09-02-2011, 09:41 PM
They are different and don't fit to the seat as you said. The Honda ones actually connect to the seat and for the price do nothing. If they cost you more than 100 bucks not worth it.
euromandeluxe
09-02-2011, 11:44 PM
The only issue I have with the roll bar "s-pod" type bracket is the skewed imaging you'd get.

The Honda headrest speakers (crap though they may be) have a L and R speaker for both seats
AusS2000
10-02-2011, 07:55 AM
Back to the question.

AP1/AP2 refers to the changeover in the US and Japan to 2.2L engine. Other changes do not necessarily correspond with these designations and the seats are a good example. Seats from and early AP2 are the same shape as AP1. Later AP2s had slightly different seats. The difference is in the hole in the headrest where these speakers mount. Late AP2s don't have the hole.
greek_rambos2k
10-02-2011, 12:00 PM
i see. thanks guys
greek_rambos2k
11-02-2011, 05:00 PM
i bought the speakers jamieP has. custom mounts, in black that supports a 6.5" speaker :D USD$70
garett
11-02-2011, 05:14 PM
post the link, wouldnt mind seeing them.
greek_rambos2k
11-02-2011, 07:45 PM
http://cgi.ebay.com/ebaymotors/Honda-S2000-Speaker-Brackets-_W0QQcmdZViewItemQQhashZitem3a6325cc28QQitemZ25077 1524648QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries
brendan1990
11-02-2011, 07:56 PM
The only issue I have with the roll bar "s-pod" type bracket is the skewed imaging you'd get.

The Honda headrest speakers (crap though they may be) have a L and R speaker for both seats

Yeah man!
greek_rambos2k
12-02-2011, 06:33 PM
well i bought them and i can make them mono so it will make em a bit better.