dc2r intake manifold to dc2 vtir

[Frosty-Civic]

will a dc2r intake manifold fit into a vtir dc2? any performance increase etc?

[JDM-EGG]

No it won't fit u would have to get a skunk 2 one

[Frosty-Civic]

which one exactly if i can ask

[JDM-EGG]

if u have to get the skunk2 one that fits b18c2 vti-r head , you can purchase it from jdm yard

[infurNOS]

dc2r AND dc2 VTiR have different heads...so no it will not fit.

http://cgi.ebay.com/ebaymotors/SKUNK2-INTAKE-MANIFOLD-94-01-ACURA-INTEGRA-B18C1-GSR-/390289411285?pt=Motors_Car_Truck_Parts_Accessories&hash=item5adf0fccd5

that is what you need...comes in black aswell. You will find you may lose some low end torque but pick up a fair bit in the mid and high range (which is where VTEC really counts) due to switching to a single stage manifold..as compared to the dual stage stock VTiR intake manifold...depending on the supporting mods of course

[Vvvtec]

Like I told you man, as the Skunk2 products are US made, order the B18c1/GSR manifold (US version of VTi-R and B18c2). Same engine, jsut different code number. And as InfurNOS mentioned above, you'll loose a tad in the low range but pick it all and some back up in the late mid range through to redline!

[dougie_504]

Yeah get the Skunk2!

And remember it's a Honda so there's little point in trying to get low-end power - the engine isn't made for that!

If you want torque you go 2L or larger displacement.

[Frosty-Civic]

ill look into the skunk2.... any recommendation for other IM that are good?

[Vvvtec]

Dont think you will find many for the price and quality of the Skunk2 one man... I can personally vouch for that.

Also, jsut uploading a video of my car now, i'll show you once its up!

[Vvvtec]

And some good reading for you:

http://www.ozhonda.com/forum/archive/index.php/t-109553.html

[Frosty-Civic]

i dont like to read :)

[Vvvtec]

Hahaha Well basically, get the Skunk2 manifold. You will not regret it.

Also, IF you decide to install it yourself, this is probably the most in-depth DIY writeup Ive seen so far:

http://ff-squad.com/wp/?p=366

[Frosty-Civic]

will be a while until i get it. i am in a financial crisis right now

[Vvvtec]

Know how you feel bro...

[Vvvtec]

From this afternoon..

http://www.youtube.com/watch?v=guQmbM5Fd1A

[Frosty-Civic]

From this afternoon..

http://www.youtube.com/watch?v=guQmbM5Fd1A

oooo thanks man. im loving that!

[RED-DC5R]

How much are the skunk2 intake manifold for b-series? its not as expensive as k-series yea?

[infurNOS]

go through the thread properly and you will know will find out.